Picture of spiral chute wear

Picture 1 of Spiral Chute Wear: Introduce the process of chute beneficiation, including inclined flow beneficiation. The slurry is fed to a inclined groove or inclined surface, and with the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The lighter minerals in the upper layer are quickly discharged to the outside of the groove, while the heavy ore materials in the lower part stagnate in the inner groove or flow out at a slow speed from the lower part. After being collected separately, the concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are machinery for mining and beneficiation, especially ideal for sand mining and beneficiation in bays, riverbanks, sandbanks, and streams. The product has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear separation of ore, large processing output, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion prevention, and strong applicability to fluctuations in feed volume, density, Granularity, and grade. 2、 The mineral mortar with equal production principles is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head end of the rotating groove for sorting. The bottom of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three categories according to grade along the radial direction. Change the selection width of each product by adjusting the position of the valve block, and the equipment gathering bucket will gather and export the obtained variable mineral flow separately. The transverse plane of the fiberglass spiral chute and the change in slope of the curve are particularly applicable for the sorting of fine particle materials. Picture of wear on the spiral chute at . 3、 Due to its low power consumption, simple structure, small footprint, easy operation, stable beneficiation, clear separation, no need for moving parts, convenient maintenance and management, and high output per unit area, fiberglass chute has attracted special attention among various gravity beneficiation machines. The machinery has a relatively wide and stable groove surface, and the mineral mortar exhibits a large area of laminar flow, making it more suitable for processing medium to fine (-4mm) sized ores. We have made spiral chutes with diameters of 400, 600, 900, and 1200 millimeters domestically, Ф The processing capacity of 1200MM four head is about 4-6 T/H. Spiral chute wear image IV, category. The wear pictures of spiral chutes can be divided into three types according to the Granularity of the processed ore materials: (1) coarse particle spiral chutes. The maximum particle size of the feed is more than 2-3mm, and the maximum can be 100-200mm. (2) Sand ore chute, processing 2-3 mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. Digital spiral chute, V. Scope of application FRP spiral chute is suitable for separating fine particles of iron, ferrotitanium, ferrochrome, ferrosulfide, tin, tantalum niobium, gold, coal, monazite, Rutile, zircon, rare earth and other metal and non-metallic mineral materials with completely Density contrast. Spiral Chute Wear Image Spiral Chute Wear Image