Spiral chute model

Spiral Chute Model 1. Explanation. The chute sorting includes the inclined surface flow sorting process. Mortar is fed to some inclined grooves or slopes. Under the push of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral material is quickly discharged from the outside of the groove, while the lower layer of heavy mineral is retained inside the groove or slowly discharged from the bottom. After each is taken, the selected ore and tailings can be obtained. The fiberglass chute is a mining and beneficiation machine, especially ideal for sand mining and beneficiation on beaches, rivers, sand banks, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear screening of minerals, large production capacity, high efficiency, high beneficiation enrichment ratio, high recycling rate, and stable operation. And it has advantages such as light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 6-piece assembled spiral chute. 2、 The mineral mortar with equal production principles is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head end of the rotating groove for sorting. The bottom of the rotating groove is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three categories according to grade along the radial direction. Change the selection width of each product by adjusting the position of the valve block, and the equipment gathering bucket will gather and export the obtained variable mineral flow separately. The transverse plane of the fiberglass spiral chute and the change in slope of the curve are particularly applicable for the sorting of fine particle materials. Spiral chute model 3. Features. This machine is applicable to sorting iron, ferrotitanium, ferrochrome, ferrosulfide, zircon sand, Rutile ore, monazite ore, phosphorus ethylene, tungsten sand, tin ore, tantalum, niobium and other nonferrous metals, rare ore metals and nonferrous metal ore bodies with specific gravity of fine materials with a Granularity of 0.3-0.02mm. This equipment has advantages such as stable sorting steps, easy control, wide range of allowable changes in ore concentration, very high enrichment ratio, high recycling rate, small land occupation, low water consumption, simple structure, no need for power, large processing output, simple installation, convenient operation, small investment, and quick results. Spiral Chute Model 4. Structural Composition Spiral Chute Principle. The fiberglass chute is composed of six parts: a feed distributor, a feed chute, a rotating chute, an equipment intercepting chute, a product gathering hopper, and a groove support (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The selected surface of the rotating groove has a pre designed durable wear-resistant layer. It has the advantages of being lightweight, sturdy, durable, and not easily damaged consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The concentrator is not limited to being placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed onto the spiral groove surface through the feeding chute at the head of the rotating groove for sorting. The tail of the rotating groove is installed in a valve type new product selection groove, and the selected new products are divided into three types (or four types) of new equipment along the radial direction according to grade. Change the width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted multi-directional mineral flow to converge and lead out. The cross section of the spiral chute and the different slopes of the curves are very suitable for sorting fine particle materials. 5、 Scope of application. The fiberglass spiral chute is suitable for processing 0.6-0.03mm and vein and placer ores, but it is unfavorable for sorting when the mud content is high. It is now widely used for processing iron ore, tungsten, tin, niobium tantalum ore, coastal and river sand, and placer gold, among others. Spiral Chute Model Spiral Chute Model