Spiral chute for Ilmenite dressing

Helical chute for Ilmenite separation I. Brief introduction of spiral chute for dust removal. Gravity beneficiation of Ilmenite spiral chute is widely used in the beneficiation of metal ore and non-ferrous metal ore due to less environmental pollution and low cost. The fiberglass spiral chute is a type of gravity separation machinery, characterized by a cubic parabolic shape on the cross-section, suitable for handling finer particle levels of -0.2MM. In the selection process, there is no need to add flushing water, and fine, medium, and tailings are segmented at the tail end of the chute. 2、 By using the method, the Ilmenite spiral chute is selected to set up the spiral chute, calibrate the vertical line, use an iron shelf or wood to stabilize it in a suitable position, and then the slurry pump will transport the sand ore to the two ore feeding ports on the spiral top, add water for filling, adjust the concentration of mineral slurry, and the slurry will naturally swirl from high to low, generate a single coherent centrifugal force in the rotating slope flow speed, and use the density, specific gravity, Granularity The difference in morphology is caused by the gravity and centrifugal force of the swirling flow, which separates the sand from the ore. The selected ore is discharged into the concentrate hopper and piped out, while the tailings flow into the tailings hopper and are piped to the sand pit. Then, they are discharged by a mortar pump, completing the entire beneficiation process. Spiral chute for Ilmenite separation III. Advantages and characteristics 1 High efficiency, high recovery probability, correct mineral separation; 2. No power required; Spiral chute installation standard, 3 small in weight, rust proof, durable, wear resistant, and strong in corrosion resistance; 4. Low operating cost and long service life; 5. Strong adaptability to fluctuation of feed volume, density, Granularity and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. The Ilmenite spiral chute is classified into three types according to the ore size processed: (1) coarse grained chute. The maximum Granularity of ore feeding is above 2-3MM, and the maximum Granularity can reach 100-200MM. (2) Sand ore chute, processing 2-3 mm particle grade ore material. (3) Slurry spiral chute, feeding particle size ＜ 0.074mm. 5、 Application of spiral chute sorting accuracy. The scope of application of this machine is to separate iron ore, ferrotitanium ore, ferrochrome, ferrosulfide, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, placer tin, tantalum, niobium ore and other non-ferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference from fine materials with Granularity of 0.3-0.02MM. Ilmenite spiral chute Ilmenite spiral chute