Spiral Chute Technology Video

Spiral chute technology video 1: Explanation: The spiral concentrator combines the characteristics of spiral chute, gravity separation spiral chute, shaking table, and centrifugal gravity concentrator. After relevant scientific research organized by the Ministry of Metallurgical Industry, design, universities, and other departments of this beneficiation company have carried out appraisal and passed. It is recognized that this type of machine has excellent performance, advanced sorting objectives, and has obtained the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has now been awarded in the field of non-ferrous metals Ferrous mines are widely used. This equipment is applicable to sorting iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phengite, tungsten ore, tin, tantalite, niobium and other nonferrous metal, rare metal and nonferrous metal ore bodies with different density and specific gravity. 2、 The mineral mortar with the same working principle is slowly fed onto the rotating groove surface through the feeding chute installed at the head of the spiral groove for sorting. The bottom of the spiral groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected multi head ore flow to be collected and exported separately. The cross section of the spiral concentrator, with a change in the slope of the curve, is extremely suitable for the selection of fine-grained materials. Video of the Spiral Chute Technology III. Advantages and Characteristics: 1. High efficiency, high recovery rate, and correct ore sorting; 2. No power required; 3. Lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low operating costs and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force caused by the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. Spiral chute technology video 4. Structure composition: Fiberglass spiral chute is composed of six parts: feeding homogenizer, feeding chute, spiral groove, equipment acquisition groove, product gathering bucket, and this groove bracket (including cross or triangular frame). The rotating groove connected by the rotating disc is the main accessory. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The spiral groove has a pre made durable wear-resistant layer on the selected surface. She has the advantages of lightweight, strong, and durable consumables. The head of the rotating groove is equipped with a multi tube ore feeding homogenizer to divide the ore dressing evenly, and the control is not cumbersome. The mineral sorting machine is freely stacked on a cross (or tripod) on a supporting table. The evenly divided slurry is slowly fed to the rotating groove surface through the feeding groove installed at the end of the spiral groove head, and sorting is carried out. The tail end of the spiral groove is installed in a valve block type new product selection groove, and the selected new products are divided into three (or four) types of new equipment along the radial direction according to grade. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the diverse mineral flows obtained to converge and export differently. The transverse plane and slope of the spiral chute are very suitable for selecting small particle materials. 5、 This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphoethylene, tungsten, tin ore, tantalum ore, tantalum niobium ore or other nonferrous metals, rare metals and nonferrous metal ore bodies with different density and specific gravity from fine and small materials with Granularity of 0.3-0.02mm. Spiral Chute Technology Video Spiral Chute Technology Video