Spiral chute sorting effect

Spiral chute sorting effect 1. Introduction: Gravity separation is widely used in the beneficiation of metallic and non-metallic ores due to its low environmental pollution and low cost. Glass fiber reinforced plastic chute is one of the gravity beneficiation equipment, with a structural feature of a cubic parabolic cross-section. It is suitable for processing finer particle sizes of -0.2mm. In the sorting step, there is no need to add water to wash, and the bottom of the chute is divided into sections to obtain refined, medium, and tailings. 2、 The working principle is that the ore slurry is slowly fed onto the rotating groove surface through the feeding chute installed at the beginning of the spiral groove, and sorting is carried out. The tail end of the spiral groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the selected multi-directional mineral flow to be densely led out. The transverse surface of the fiberglass chute has different slopes, which is very suitable for the separation of fine mineral particles. Spiral chute separation effect 3. Features 1. The separation process is stable and easy to control 2. The allowable range of feed density is large 3. High enrichment and high recovery rate 4. Small floor area, low water consumption 5. Simple structure, no power required 6. Large production capacity 7. Simple installation, easy to operate 8. Less input, quick effect spiral chute separation effect 4. Classification according to the Granularity of the ore processed, Chutes can be divided into three types: (1) Coarse grained chutes, with a maximum particle size of 2-3mm or more for ore feeding, and a maximum of 100-200mm. (2) The ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding Granularity is less than 0.074MM. 5、 The application scope of this machine is to separate iron ore, ferrotitanium ore, ferrochrome, ferrosulfide, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, placer tin, tantalum, niobium ore and other nonferrous metals, rare mineral metals and this nonferrous metal mineral body with gravity difference from fine materials with Granularity of 0.3-0.02MM. Spiral chute sorting effect Spiral chute sorting effect