Application of spiral chute in Ilmenite separation

Application of spiral chute in Ilmenite beneficiation I. Introduction of gravity beneficiation spiral chute is a combination of the characteristics of gravity concentration spiral chute, glass fiber reinforced plastic spiral chute, shaking table and beneficiation centrifuge. After the relevant scientific research organized by the Ministry of Metallurgical Industry, and the appraisal conducted by the design, university and the beneficiation company and other departments, it is recognized that this kind of equipment has excellent performance and the improvement of beneficiation indicators. At the same time, it has won the scientific and technological research achievement award from the Ministry of Metallurgical Industry Ferrous mines are very versatile. This product is suitable for sorting iron ore, ferrotitanium, ferrochrome, pyrite, zircon, Rutile, monazite, ethylene phosphate, tungsten, tin placer, tantalum, tantalum niobium and other nonferrous metal ores, rare ore metals and non-metallic ore bodies with density and specific gravity differences. 2、 The glass fiber reinforced plastic spiral chute shall be set up with skills, aligned with the vertical line, and fixed in a suitable position with iron shelves or wood. The sand pump shall be used to transport the mineral sand to the two ore feeding ports above the spiral, add make-up water, and adjust the concentration of the mineral slurry. The mineral slurry naturally swirls from high to low. A single coherent centrifugal force appears in the rotating slope flow rate, and the difference in the gravity, Granularity and shape of the mineral sand is obtained, By utilizing the gravity and centrifugal force of the swirling flow, the sand and ore are separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings enter the tailings hopper and are connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire process of beneficiation. Application of spiral chute in Ilmenite beneficiation III. Features 1. Stable beneficiation process and simple control 2. Large allowable variation range of ore feeding concentration 3. High enrichment ratio and high recycling rate 4. Small land area occupied, low water consumption 5. Simple structure, no power required 6. Strong processing capacity 7. Easy installation and operation 8. Low investment and effective fast spiral chute for Ilmenite beneficiation IV The structure of spiral chutes consists of a feeding device, a cross (tripod), a feeding groove, a spiral groove, an acquisition groove, a gathering bucket, and a groove pillar. 5、 The use scope of glass fiber reinforced plastic chute is suitable for the separation of fine grained iron ore, ferrotitanium ore, chromite ore, pyrite ore, tin, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon, rare earth ore, and has enough Density contrast to obtain other metal and non-metallic ores. Application of spiral chute in Ilmenite beneficiation Application of spiral chute in Ilmenite beneficiation