Coal selection spiral chute manufacturer

Coal selection spiral chute manufacturer 1. Product overview: A gravity beneficiation equipment that uses the continuous centrifugal force generated by mortar in rotary spiral motion to achieve lightweight and heavy mineral separation. 2、 Use the method to erect the spiral chute, calibrate the vertical line, fix it in the proper position with iron frame or wood, let the sand ore be sent to the two feeding ports on the top of the spiral by the slurry pump, add water, adjust the density of the mineral slurry, the mineral slurry naturally swirls from top to bottom, and generate a single coherent centrifugal force in the rotational slope flow speed, which can be distinguished by the specific gravity, Granularity and state of the mineral sand, Through the gravity and centrifugal force of swirling flow, the ore and sand are separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and transported to the sand pit through pipelines, and then discharged by a sand pump, completing the entire process of beneficiation. Manufacturer 3: Advantages and Features of Coal Preparation Spiral Chute: Stable, Easy to Control, and Wide Concentration Range. 2. The processing volume of mineral materials is large, with high enrichment ratio and high recycling rate. 3. It occupies a small area, consumes less water, has a simple structure, and does not require power. 4. Simple installation, easy operation, low investment, and fast returns. Coal selection spiral chute manufacturer 4. The structure of the fiberglass spiral chute consists of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product selection groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove formed by connecting rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by bolts. The sorting surface of the spiral groove has a pre designed durable wear-resistant layer. He also has the advantages of lightweight, sturdy, durable and durable consumables. A multi tube feeding homogenizer is installed above the rotating groove to screen the ore evenly, making it easy to control. The ore separator is not limited to being placed on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed onto the surface of the rotating groove by the feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is installed in a valve type new equipment to obtain the groove, allowing the sorted new products to be divided into three categories (or four categories) along the radial direction according to the grade of the new equipment. Change the cutting width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that densely leads out the selected multi head ore flow. The horizontal plane of the spiral concentrator, with a change in the slope of the curve, is particularly suitable for the separation of fine particle materials. 5、 Applicable fields The application scope of spiral concentrator is to separate fine grained iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon, rare earth ore and other metal and non nonferrous metal minerals with sufficient density and specific gravity difference. Coal preparation spiral chute manufacturer Coal preparation spiral chute manufacturer