Supplier of spiral chute for coal washing and ash reduction

Introduction to Supplier 1 of Coal Washing and Ash Reduction Spiral Chutes Gravity beneficiation is widely used in the beneficiation of metal and non-ferrous metals due to its low environmental pollution and cost. The fiberglass spiral chute is a type of gravity separation machinery, characterized by a cubic parabolic shape on the cross-section, suitable for handling finer particle levels of -0.2MM. In the selection process, there is no need to add flushing water, and fine, medium, and tailings are segmented at the tail end of the chute. 2、 The technical principle is that the slurry is evenly distributed and slowly fed onto the surface of the spiral groove through the feeding groove installed at the head end of the rotating groove, implementing sorting. The tail of the rotating groove is equipped with a valve block type product acquisition groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be distinguished and gathered. The cross-section of the fiberglass chute and the slope change of the curve are particularly suitable for the separation of fine particle materials. Supplier 3: Advantages and Features of the Spiral Chute for Coal Washing and Ash Reduction: 1. Stable, easy to operate, and with a large density range. 2. The material processing yield is large, the enrichment ratio is high, and the recycling rate is high. 3. The space occupation is not large, the water consumption is low, the structure is simple and simple, and there is no need for power. 4. Easy installation, easy operation, low investment, and fast returns. The spiral chute supplier for coal washing and ash reduction IV. According to the Granularity of the processed mineral aggregate, the chute can be divided into three types: (1) coarse particle spiral chute, the maximum particle size of the feed is more than 2-3mm, and the maximum can reach 100-200mm. (2) Sand ore chute, handling 2-3MM particle size ore. (3) Slime chute, Granularity of ore feeding is less than 0.074mm. 5、 The use of a field spiral concentrator is suitable for processing 0.6-0.03 millimeters or vein ore and this sand, but it is unfavorable for separation when the mud content is high. Currently, it has been widely used in the processing of iron, tungsten, sand tin, tantalum niobium, coastal or riverside sand mines, as well as sand gold mines. Supplier of spiral chute for coal washing and ash reduction Supplier of spiral chute for coal washing and ash reduction