Closed circuit connection diagram of spiral chute

The closed circuit connection diagram of the spiral chute 1. Introduction: The spiral chute combines the characteristics of a spiral concentrator, a gravity concentrator spiral chute, a shaker, and a centrifugal concentrator. After being organized by the Ministry of Metallurgy for relevant scientific research, design, operation and appraisal by universities and this beneficiation enterprise, it has been recognized as a type of machine with excellent performance, advanced sorting objectives, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has now been awarded the Nonferrous Metals Ferrous mines are widely used. This machine is suitable for separating iron ore, ilmenite, ferrochrome, pyrite, zircon, Rutile, monazite, phosphate, tungsten, tin placer, tantalite, niobium ore and other nonferrous metals, rare mineral metals and nonferrous metal minerals with gravity difference from small materials with Granularity of 0.3-0.02 mm. 2、 Use the method to erect the spiral chute, calibrate the vertical line, use an iron frame or wood to set a suitable position, use the mortar pump to send the sand ore to the two feeding ports above the spiral, enter the increased water, adjust the density of the mineral slurry, the mineral mortar naturally swirls from high to low, and a coherent centrifugal force occurs in the flow speed of the whirling inclined surface, and the gravity, Granularity and morphology of the sand ore are different, The efficiency is obtained by the gravity and centrifugal force of the swirling flow, which separates the ore and sand. The selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings are discharged into the tailings hopper and moved to the sand tank through pipelines. Then, they are discharged by a sand pump, completing the entire beneficiation process. The closed circuit connection diagram of the spiral chute. 3. Characteristics and advantages. 1. Superlarge-scale, large processing capacity, and modern mineral processing objectively require scale to create benefits. 2. Fine granulation: for the treatment of fine minerals, especially for the treatment of ores with a particle size of -0.047mm, the original machine can generally ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP chutes have developed from simple use of gravity and water blocking force to composite use of centrifugal force, mechanical vibration force, magnetic separation force, etc. Through a composite force field, the enrichment of applicable minerals and the separation of fine particles from these fine particles are enhanced, thereby improving the recovery rate of ore materials. 4. The basic starting point is to save energy, reduce energy consumption and protect the environment. The area and space occupied should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting steps, simple structure, convenient for Computerized maintenance management system. The closed circuit connection diagram of the spiral chute is IV. The structure of the spiral chute is composed of six parts: a feeding homogenizer, a feeding groove, a rotating groove, a product acquisition groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the spiral pieces is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by screws. The selection surface of the rotating groove has a pre made wear-resistant layer. She has the advantages of lightweight, sturdy, and durable consumer goods that are not easily damaged. The head of the spiral groove is equipped with a multi tube feeding homogenizer to sort minerals evenly, which is not cumbersome to operate. The mineral sorting device is freely placed on the cross (or tripod) of the support table. The evenly divided mortar is slowly fed onto the surface of the spiral groove through the feeding chute at the head end of the rotating groove for sorting. The tail of the rotating groove is installed in a valve block type new product selection groove, allowing the selection of new equipment to be divided into three (or four) types of new products radially according to grade. Change the cutting width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that distinguishes and converges the obtained multi head ore flows. The horizontal plane of the spiral concentrator is particularly suitable for the separation of small particle ore materials when the slope of the curve changes. 5、 The application field of fiberglass chute is used for processing 0.6-0.03MM and vein ore and ore sand, but it is unfavorable for sorting when the mud content is high. Currently, it has been widely used for processing iron ore, tungsten, sand tin, tantalum niobium, coastal and riverside sand mines, placer gold mines, and so on. Closed Circuit Connection Diagram of Spiral Chute Closed Circuit Connection Diagram of Spiral Chute