Spiral chute for Ilmenite dressing

Spiral chute for Ilmenite separation I. Description of beneficiation chute includes slope flow separation process. The slurry is fed to a inclined chute or inclined plane, and under the push of water, the mineral particle group becomes loose and layered. The upper layer of light mineral material is quickly discharged from the groove, while the lower layer of heavy mineral stays in the groove or flows out at low speed from the bottom. After obtaining the concentrate and tailings, respectively. Glass fiber reinforced plastic chutes are mining and beneficiation equipment, especially ideal for mineral mining and beneficiation on beaches, riverbanks, sandbanks, and river beds. The equipment has the characteristics of appropriate structure, simple installation, small footprint, simple operation, stable beneficiation, clear separation of ore, strong processing ability, high efficiency, high enrichment ratio, high recovery probability, and stable operation. And it has advantages such as light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The method of use is to set up the spiral concentrator, calibrate the vertical line, fix the iron shelf or wood in the proper position, send the sand ore to the two ore feeding ports on the spiral top by the slurry pump, add water, adjust the density of the mineral slurry, the slurry naturally swirls from high to low, generate a single coherent centrifugal force in the flow speed of the rotating slope, and obtain the difference in the specific gravity, Granularity and state of the sand ore, Through the action of gravity and centrifugal force obtained through swirling flow, the sand and ore are separated, and the concentrate is discharged into the beneficiation hopper and connected out through pipelines. The tailings flow into the tailings hopper and are moved to the sand tank through pipelines, and then discharged by a sand pump, completing the entire beneficiation process. Ilmenite spiral chutes. 3. Features and advantages. 1. Super large, large processing capacity. In principle, modern mineral processing requires large scale to create benefits. 2. Fine granulation refers to the treatment of fine and small mineral particles, especially the treatment of mineral materials with a particle size of -0.047mm. Originally, the mechanical system could fundamentally ensure the recovery of+0.047mm particles. 3. With the development of Hydraulics, two-phase flow and equipment vibration, spiral chutes have developed from simple use of gravity and water resistance to composite application of centrifugal force, mechanical vibration force, magnetic force, etc. Through a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are increased, resulting in an increase in ore recovery rate. 4. Based on energy saving, environmental protection and consumption reduction, it needs to occupy a small area, space, water and electricity consumption. 5. The simple operation is flexible, the sorting process is stable, and the structure is simple, which is convenient for Computerized maintenance management system. The spiral chute for Ilmenite ore dressing IV. The spiral concentrator is composed of ore feeding homogenizer, cross (tripod), feeding chute, spiral chute, intercepting chute, agglomeration hopper and trough pillar. 5、 The spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, cassiterite, tantalum niobium ore, placer gold ore, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and non-metallic mineral materials with sufficient density ratio difference. Ilmenite spiral chute Ilmenite spiral chute