Operating procedures for spiral chute beneficiation

Spiral chute beneficiation operation regulation 1. Equipment description: A gravity separation machine used for mineral mortar to achieve lightweight and heavy mineral separation due to the inertial centrifugal force during spiral motion. 2、 The working principle is the same: mineral mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the end of the spiral groove head, and sorting is carried out. The bottom of the spiral groove is equipped with a valve block type product cutting groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi head ore flow to be aggregated and exported. The cross section of the spiral concentrator and the change in slope of the curve are very suitable for the selection of fine-grained ore materials. 3. Highlights and Characteristics of the Operating Regulations for the Beneficiation of Spiral Chutes: 1. High efficiency, high recovery rate, and correct mineral separation; 2. Do not use power; 3. Small weight, anti rust, durable and anti wear, durable and anti corrosion; 4. Low cost, long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. Operating Procedures for Spiral Chute Beneficiation IV. Chutes can be divided into three types according to the Granularity of processed ore materials: (1) Coarse spiral chutes. The maximum particle size of feed is more than 2-3MM, and the maximum can reach 100-200mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 The application scope of this machine is to separate iron, ferrotitanium, chromite ore, pyrite ore, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten ore sand, cassiterite, tantalum niobium, niobium ore or other non-ferrous metal ore, rare metal or non-metallic ore body with gravity difference from 0.3-0.02mm fine material. Operating Procedures for Spiral Chute Beneficiation Operating Procedures for Spiral Chute Beneficiation