Digital spiral chute

Digital Spiral Chute 1. Overview Chute sorting belongs to the inclined flow sorting process. The mortar is fed to some inclined grooves or slopes, and with the assistance of water flow, the mineral particles become loose and layered. The upper layer of light minerals are quickly discharged outside the groove, while the lower layer of heavy minerals are retained inside the groove or slowly discharged from the lower part. After each is collected, the selected ore and tailings can be obtained. The fiberglass spiral chute is a mining and beneficiation machine, making it ideal for mining and beneficiation of mineral sand on beaches, river beds, sand banks, and streams. The product has the characteristics of correct structure, simple installation, small footprint, simple operation, stable beneficiation, clear mineral separation, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong adaptability to fluctuations in feed volume, density, Granularity and grade. 2、 Production principle: The spiral chute screening machine is freely placed on the cross (or tripod) on the support table. The uniform mortar is slowly fed to the surface of the rotating groove through the feeding groove installed at the beginning of the spiral groove, and the selection is carried out. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each equipment by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that converges and induces the obtained multi head ore flow. The cross-section of the fiberglass spiral chute and the slope of the curve change, which is very suitable for the separation of fine mineral materials. Digital Spiral Chute III. Advantages and Features: 1. High efficiency, high recovery rate, and accurate ore sorting; 2. No power required; 3. Lightweight, rust proof, durable, wear-resistant, and corrosion-resistant; 4. Low cost operation, long service life; 5. It is applicable to the fluctuation of feed volume, density, Granularity and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. Digital spiral chute IV. According to the particle size of processed ore, the chute can be divided into three types: (1) coarse spiral chute. The maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) The sand ore chute is used to handle 2-3MM particle grade ore materials. (3) Slurry chute, feeding particle size less than 0.074 millimeters. 5、 Scope of application Spiral concentrator is suitable for separating fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin, tantalum niobium ore, placer gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore or other metal and non-metallic ore with sufficient gravity difference. Digital Spiral Chute Digital Spiral Chute