Enrichment ratio of tin ore Sawtooth wave jig

Tin ore Sawtooth wave jig is a kind of equipment widely used in tin ore dressing process. It separates ore into different densities through wavy movement, so as to achieve the purpose of enrichment. In this process, the enrichment ratio is a very important parameter, which directly affects the quality of the enrichment effect. This paper will introduce the concept, calculation method and adjustment method of the enrichment ratio of tin ore Sawtooth wave jig in detail.

I. Concept of enrichment ratio of tin ore Sawtooth wave jig

Enrichment ratio refers to the degree of ore separation in the Sawtooth wave wave jig and the change of weight ratio of ore before and after entering the jig. Usually, the higher the enrichment ratio, the more thorough the separation of the ore and the better the enrichment effect.

2、 Calculation method of enrichment ratio of tin ore Sawtooth wave jig

The calculation method of enrichment ratio of tin ore Sawtooth wave jig is relatively simple, which only needs to measure the weight of incoming and outgoing materials. The specific calculation formula is as follows:

Enrichment ratio=Jig discharge weight/Jig feed weight

In practical operation, it should be noted that the weight of incoming and outgoing materials needs to be accurately measured to avoid errors. At the same time, it is also necessary to pay attention to the influence of the moisture and particle size of the ore on the enrichment ratio, and corresponding adjustments need to be made.

III. Adjustment method of enrichment ratio of tin ore Sawtooth wave wave jig

In order to obtain better enrichment effect, it is necessary to adjust the enrichment ratio of tin ore Sawtooth wave jig. The specific methods are as follows:

1. Adjust the feed flow rate

The feed flow rate of is one of the important factors affecting the enrichment ratio. If the feed flow rate is too high, it can easily cause overload of the jig and affect the enrichment effect. Therefore, in practical operation, it is necessary to adjust the feed flow rate reasonably based on the properties of the ore and the characteristics of the equipment.

2. Adjust water flow

Water flow is another important factor affecting the enrichment effect of Sawtooth wave wave jigs. If the water flow rate is too large, it can easily cause the ore to be washed away, affecting the enrichment effect. Therefore, in practical operation, it is necessary to adjust the water flow reasonably based on the properties of the ore and the characteristics of the equipment.

3. Adjust waveform and frequency

Waveform and frequency are the other two important factors that affect the enrichment effect of Sawtooth wave wave jigs. Different ores require different waveforms and frequencies to achieve the best enrichment effect. Therefore, in practical operation, it is necessary to adjust the waveform and frequency reasonably based on the properties of the ore and the characteristics of the equipment.

4、 Conclusion

The enrichment ratio of tin ore Sawtooth wave jig is one of the important factors affecting the enrichment effect, which needs to be adjusted reasonably in actual operation. By adjusting factors such as feed flow rate, water flow rate, waveform, and frequency, better enrichment effects can be achieved. Therefore, in the process of tin ore dressing, the control of Sawtooth wave wave jig enrichment ratio is very important and needs attention.