Zirconium sand gravity separation equipment

Zirconium sand is a high-quality ore widely used in fields such as ceramics, glass, electronics, and chemical engineering. However, in the mining and processing processes of zircon sand, some impurities may be mixed, which affects the quality of zircon sand and therefore requires re selection. Zircon sand re selection equipment is a device specifically designed to remove impurities from zircon sand. This article will provide a detailed introduction to the operating steps of the zirconium sand gravity separation equipment.

1、 Working principle of zirconium sand gravity separation equipment

The zircon sand gravity separation equipment is a gravity beneficiation machine that utilizes the differences in specific gravity of different minerals to classify the ore through a hydraulic classifier, thereby achieving the purpose of removing impurities. The zirconium sand gravity separation equipment mainly consists of a feeding system, a hydraulic classifier, a flotation machine, a filter, and a conveying system.

2、 Operation steps of zirconium sand gravity separation equipment

1. Preparation work

Before conducting zirconium sand re selection, it is necessary to inspect and maintain the equipment to ensure its normal operation. At the same time, it is necessary to conduct preliminary crushing and screening of zircon sand for subsequent re selection work.

2. Feed system

Put the preliminarily crushed and screened zircon sand into the hydraulic classifier through the feeding system. The feeding system mainly consists of vibrating feeders, belt conveyors, bucket elevators, etc.

3. Hydraulic classifier

The hydraulic classifier is the core component of zirconium sand gravity separation equipment, which can classify ores into different levels according to their specific gravity. The hydraulic classifier mainly consists of a feeding port, a rotating impeller, a water tank, a sludge discharge port, etc.

4. Flotation machine

After being classified by a hydraulic classifier, the zircon sand enters the flotation machine for flotation. The flotation machine mainly consists of an agitator, a gas supply system, a flotation tank, etc.

5. Filter

The zirconium sand after flotation needs to be filtered to separate the water. The filter mainly consists of a filter screen, filter cake discharger, water pump, etc.

6. Conveying system

Finally, the filtered zircon sand is transported to the destination through a conveyor system. The conveying system mainly consists of belt conveyors, screw conveyors, bucket elevators, etc.

3、 Maintenance of Zirconium Sand Gravity Separation Equipment

In order to ensure the normal operation of the zirconium sand gravity separation equipment, regular maintenance is required. Specific measures include cleaning equipment, replacing vulnerable parts, and adding lubricating oil.

IV. Conclusion

Zircon sand gravity separation equipment is an important equipment for removing impurities from zircon sand. It adopts the principle of gravity beneficiation and uses a hydraulic classifier to classify the ore, thereby achieving the purpose of removing impurities. When operating the zirconium sand gravity separation equipment, it is necessary to follow certain steps and conduct regular maintenance to ensure the normal operation of the equipment.