Specification for spiral chute feeding of mineral processing equipment

Introduction to the feeding specifications of spiral chutes for mineral processing equipment. The fiberglass spiral chute summarizes the characteristics of gravity separation spiral chutes, spiral chutes, shakers, and centrifuges used for mineral processing. After being evaluated by relevant scientific research, design, school, and concentrator units organized by the Ministry of Metallurgical Industry, it is believed that this machine has excellent performance, progressive sorting goals, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This product is suitable for separating fine materials with Granularity of 0.3-0.02mm to obtain iron, ferrotitanium ore, chromite ore, pyrite, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten sand, tin ore, tantalum niobium, tantalum niobium ore and other non-ferrous metal ores, rare mineral metals or non-metallic mineral bodies with gravity differences. 2、 The number of heads of the spiral chute refers to. Equal mineral mortar is slowly fed onto the surface of the rotating groove by installing the feeding chute at the end of the spiral groove head, and selection is carried out. The tail of the spiral groove is equipped with a valve block type equipment to select the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each equipment, the product gathering hopper allows the obtained multi head ore flow to be collected and exported separately. The cross section and slope of the curve of the fiberglass chute are very suitable for the sorting of fine particle materials. Specification 3, Highlights or Characteristics of Spiral Chute Feeding for Mineral Processing Equipment. 1. Ultra high efficiency, high recovery probability, and accurate mineral sorting; 2. No power required; 3. Lightweight, rust resistant, wear-resistant, and corrosion-resistant; 4. Low cost, long service life; 5. It is applicable to the fluctuation of feed volume, density, Granularity and grade; The friction force formed by the appearance of 6 diamond sand makes the beneficiation efficiency superior to other plastic surfaces. The feeding specification of spiral chute of mineral processing equipment is IV. According to the Granularity of the processed ore, the chute can be divided into three types: (1) coarse spiral chute, the maximum feeding particle size is more than 2-3mm, and the maximum feeding particle size can reach 100-200mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. Manufacturer of spiral chute for coal preparation, feeding specification of spiral chute for beneficiation equipment (3) spiral chute for slime, feeding Granularity<0.074MM. 5、 Applicable. Feeding specification of spiral chute of beneficiation equipment This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon ore, Rutile, monazite, phosgenite, wolframite, cassiterite, tantalum, niobium and other nonferrous metals, rare ore metals and nonferrous metal mineral bodies with specific gravity difference from fine materials with Granularity of 0.3-0.02MM. Mineral processing equipment spiral chute feeding specification Mineral processing equipment spiral chute feeding specification