Plastic steel spiral chute

Plastic steel spiral chute 1. Describing the process of mineral sorting in the chute, which belongs to the inclined flow sorting step. Mineral mortar is provided on a partially inclined inclined chute or slope. With the assistance of flowing water, the mineral particle group is not tight and layered. The upper part of the light mineral quickly flows out of the groove, while the lower layer of minerals with a larger proportion stay inside the groove or discharge from the bottom at a low speed. After being connected, concentrate and tailings can be obtained., Plastic steel spiral chutes are machinery for mining and beneficiation, especially ideal for mineral mining in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of ore, high yield, high efficiency, high beneficiation enrichment ratio, high recycling rate, and reliable operation. It has the advantages of small weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong applicability to the fluctuation of feed volume and density, Granularity, and grade. 2、 Technical principles. The plastic steel spiral chute spiral chute separator is not limited to being placed on the cross (or tripod) of the support table. Equal slurry is slowly fed to the spiral groove surface through the feeding chute at the end of the rotating groove head for sorting. The bottom is equipped with a valve block type equipment acquisition slot, allowing other products to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that collects and exports the intercepted variable mineral flows separately. The transverse surface of the fiberglass chute has a very variable slope, which is suitable for the selection of fine particle materials. plastic steel spiral chute 3. Characteristics or advantages 1. It is heavy and has strong processing capacity. Today's mineral aggregate processing is objectively conditional on using large scale to create revenue. 2. Fine granulation: for the treatment of fine and micro particle minerals, especially the treatment of ore materials with Granularity of -0.047MM, the original equipment can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow and machine vibration, the spiral concentrator has developed from a simple use of gravity and water resistance to a composite application of centrifugal force, equipment vibration force, magnetic separation force, etc. By using a composite force field, more useful minerals are enriched and the separation of fine particles from these fine particles increases the ore recovery rate. 4. Based on energy saving, environmental protection and consumption reduction, the area and space occupied should be small, and the water and electricity consumption should be small. Multi head spiral chute. 5. The operation is simple and flexible, the sorting process is stable, the structure is simple and simple, and it is convenient for maintenance management. Plastic Steel Spiral Chute 1.5 meter Spiral Chute, Plastic Steel Spiral Chute 4. The structure of the spiral chute consists of a feeding device, a cross (tripod), a feeding groove, a spiral groove, a receiving groove, a gathering bucket, and a groove support. How much are spiral chutes and spiral concentrators? Plastic steel spiral chutes. 5. This equipment is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, tungsten ore, tin ore, tantalite, niobium and other non-ferrous metals, rare mineral metals and non-ferrous metal minerals with gravity differences. Plastic Steel Spiral Chute Plastic Steel Spiral Chute