Spiral Chute Industry Report

Spiral Chute Industry Report 1. Product Description. A gravity separation equipment that utilizes the inertial centrifugal force of mortar in rotary spiral motion to separate light and heavy mineral materials., Spiral Chute Industry Report 2. Production Principle: The spiral chute mineral separator does not need to be restricted from being stacked on a cross (or tripod) on a support table. The evenly proportioned mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head for selection. The tail is equipped with a valve type equipment selection tank, which divides the sorted products into three types (or four categories) according to grade along the radial direction. Change the cutting width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that allows for the dense export of the obtained variable mineral flow differentiation. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine mineral particles. Spiral Chute Industry Report 3. Features and Advantages 1. Significant scale and strong processing capacity. Currently, mineral material processing requires a large-scale establishment of profits. The process of sand gold spiral chute is reported in the spiral chute industry report 2. Fine granulation, which involves the treatment of fine particle grade mineral materials, and the treatment of mineral particles with a particle size of -0.047mm. The original machinery was generally able to ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow, machine vibration, etc., spiral chutes have developed from simple use of gravity and flow resistance to composite application of centrifugal force, equipment vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful mineral materials and the separation of fine particles and micro particles can be enhanced, thereby improving the mineral recovery rate. 4. Based on saving energy consumption, reducing energy consumption and environmental protection, the land area and space occupied should be small, and water and electricity consumption should be small. 5. Convenient and flexible operation, stable sorting process, simple structure and convenient Computerized maintenance management system. Spiral Chute Industry Report IV. Structural Composition. The fiberglass spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product selection groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove connected by spiral blades is a key accessory. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by screws. The spiral groove has a pre made durable wear-resistant layer on the selected surface. He also has the advantage of lightweight, sturdy, and long-lasting consumables. The rotating groove is equipped with a multi tube feeding homogenizer to evenly distribute the ore, and the operation is not complicated. The screening machine is freely stacked on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the beginning of the spiral groove, and sorting is carried out. The bottom of the rotating groove is installed in a valve block type new product cutting groove, and the selected new equipment is divided into three types (or four categories) of new products along the radial direction according to grade. Change the width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the selected multi head ore flow to converge and export separately. The cross-section of the spiral chute and the slope of the curve are extremely applied to the separation of fine particle materials. 5、 Applicable fields The application scope of spiral concentrator is to separate fine grained iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon, rare earth ore and other metal and non nonferrous metal minerals with sufficient density and specific gravity difference. Spiral Chute Industry Report Spiral Chute Industry Report