The function of spiral chutes

Overview of the functions of spiral chutes. Chute sorting belongs to the step of slope flow sorting. Mineral mortar is fed to a partially inclined chute or inclined surface. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The lighter mineral material on the upper part is quickly discharged out of the groove, while the heavy mineral material on the lower part is stagnant inside the groove or flows out at a low speed from the lower end. After being connected, the selected ore or tailings are obtained. The spiral concentrator is a mechanical device for mining and beneficiation, making it ideal for sand mining in coastal, river, sand beach, and stream beds. The product has the characteristics of appropriate structure, easy installation, small land occupation, easy operation, stable beneficiation, clear mineral separation, high yield, high-efficiency beneficiation, ultra-high enrichment ratio, high recycling rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion resistance, and strong applicability to fluctuations in feed volume and density, Granularity, and grade. 2、 Operating principle. The spiral concentrator screening mineral device is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed on the rotating groove head, and the selection is carried out. The bottom is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) types according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that aggregates and leads out the obtained multi head ore flow. The transverse section of the fiberglass chute and the change in slope of the curve are particularly suitable for the selection of small particle materials. Function 3, Highlights and Features of the Spiral Chute: 1. Ultra high efficiency, high recycling rate, and accurate mineral screening; 2. No power required; 3. Lightweight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low cost and long service life; Seven circle spiral chutes, the functions of the spiral chutes are 5, which have strong adaptability to fluctuations in ore feeding volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. The function of spiral chute is IV. According to the size of ore processed, the chute can be divided into three types: (1) Coarse grained chute. The maximum Granularity of ore feeding is more than 2-3MM, and the maximum can reach 100-200MM., The function of spiral chutes (2) sand ore chutes, processing 2-3 mm particle grade mineral materials. (3) Slurry spiral chute, feeding particle size ＜ 0.074mm. 5、 Application. This machine is applicable to sorting iron, ferrotitanium, chromite ore, pyrite ore, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten ore sand, cassiterite, tantalum niobium, niobium ore or other non-ferrous metal ore, rare metal or non-metallic ore body with gravity difference from 0.3-0.02mm fine material. Functions of Spiral Chutes Functions of Spiral Chutes