The production method of spiral chutes for express delivery

The production method of spiral chutes for express delivery. The production method of spiral chutes for express delivery: 1. Introduction: Fiberglass reinforced plastic spiral chutes integrate the characteristics of spiral chutes, spiral chutes, shakers, and centrifugal concentrators. After being evaluated and approved by relevant scientific research, design, universities, and mining units organized by the Ministry of Metallurgy, it is believed that this type of machine has superior performance, improved sorting indicators, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry Black mining metals are widely used. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon ore, Rutile ore, monazite ore, phosphorus, tungsten ore, tin ore, tantalum niobium, niobium ore and other nonferrous metal ores, rare mineral metals or nonferrous metal mineral bodies with density and specific gravity difference from small materials with a Granularity of 0.3-0.02 mm. 2、 The technical principle is the same: the mortar is slowly fed to the rotating groove surface through a feeding groove installed on the spiral groove head for sorting. The tail end of the spiral groove is equipped with a valve block type product cutting groove, which divides the selected equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi head ore flow to be differentiated and aggregated for export. The cross section of the spiral concentrator has different slopes, which is particularly suitable for the separation of small particle ore materials. The production method of spiral chutes for express delivery of includes three characteristics: 1. Stable sorting process and easy control; 2. Large allowable variation range of ore concentration; 3. Ultra high enrichment ratio and high recycling rate. 4. The occupied land area is relatively small and the water consumption is small. 5. The structure is simple and does not require power. 6. The production capacity is high. 7. The installation is simplified and easy to operate. 8. The production method of spiral chutes for express delivery with small investment and quick effect is . 4. The structural composition. Spiral chutes are all composed of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral chute, a cutting chute, a gathering bucket, and a trough support. 5、 Application. The scope of application of this machine is to separate iron ore, ferrotitanium ore, ferrochrome, ferrosulfide, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, placer tin, tantalum, niobium ore and other non-ferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference from fine materials with Granularity of 0.3-0.02MM. Manufacturing Method of Spiral Chutes for Express Delivery Manufacturing Method of Spiral Chutes for Express Delivery