Picture of circular spiral chute

Picture 1 of Circular Spiral Chute: Equipment Introduction. A gravity beneficiation machine used for the separation of light and heavy minerals through the coherent centrifugal force that occurs in the rotary spiral motion of mortar. 2、 Operation principle: Complete set of spiral chute equipment. The fiberglass chute separator does not need to be restricted from being placed on the cross (or tripod) of the support table. The same mineral mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the head end of the spiral groove, and sorting is carried out. The bottom is equipped with a valve block type product cutting groove, allowing the selected equipment to be divided into three types (or four types) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that converges and induces the obtained variable mineral flows. The transverse section of the fiberglass spiral chute and the change in slope of the curve are extremely suitable for the selection of fine particle materials. Circular spiral chute Picture Spiral chute specification parameters, 3. Characteristics This product is suitable for sorting iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten, tin ore, tantalum niobium, niobium ore and other non-ferrous metals, rare mineral metals or nonferrous metal mineral bodies with different specific gravity of fine materials with a Granularity of 0.3-0.02MM. This product has the advantages of stable sorting process, simple control, wide range of allowable changes in ore concentration, high enrichment ratio, high recovery probability, small land area, less water consumption, simple structure, no power, high output, easy installation, simple operation, low investment, and quick effectiveness. The spiral concentrator consists of a feeding homogenizer, a cross (tripod), a feeding chute, a spiral groove, a cutting groove, a gathering bucket, and a groove pillar. 5、 The spiral chute is suitable for separating fine grained iron ore, ilmenite ore, chromite ore, pyrite ore, sand tin, tantalum niobium ore, placer gold ore, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore, and has enough Density contrast to obtain other metal and non-metallic mineral materials. Circular spiral chute image Circular spiral chute image