Experimental Report on Spiral Chute Beneficiation

Experimental Report on Mineral Processing of Spiral Chutes 1. Equipment Description: Wholesale of Fiberglass Spiral Chutes. A gravity beneficiation machine that utilizes the continuous centrifugal force generated by the spiral rotation movement of mineral slurry to achieve lightweight and heavy mineral separation. 2、 Operating principle. The spiral concentrator screening mineral device is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed on the rotating groove head, and the selection is carried out. The bottom is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) types according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that aggregates and leads out the obtained multi head ore flow. The transverse section of the fiberglass chute and the change in slope of the curve are particularly suitable for the selection of small particle materials. Spiral Chute Beneficiation Experiment Report 3. Characteristics and Advantages 1. Significant typification and high processing yield. Currently, the overall requirement for treating mineral materials is to establish profits through scale efficiency. 2. Fine granulation is used for the treatment of fine and small particle grade mineral materials, especially for particles with a particle size of -0.047mm. Originally, the mechanical system was able to ensure the recovery of a particle size of+0.047mm. 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., the spiral concentrator has developed from simply using gravity and water flow resistance force to the level of composite applicable centrifugal force, machine vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable mineral materials or the separation of fine and fine particles can be increased, thereby improving the mineral recovery rate. Spiral chute beneficiation experiment report 4. Based on energy saving, energy consumption reduction and environmental protection, it occupies a small area, space, water and electricity consumption. 5. The operation is simple and flexible, the selection process is stable, and the structure is simple and easy to repair and manage. Spiral chute beneficiation experimental report . Spiral chute beneficiation experiment report 4. Structural composition: The fiberglass chute is composed of six parts: a feeding homogenizer, a feeding trough, a rotating trough, an equipment intercepting trough, a product gathering hopper, and a trough bracket (including a cross or triangular frame). The spiral groove formed by the connection of spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together. The selected surface of the rotating groove has a pre designed durable wear-resistant layer. It has the advantages of being lightweight, sturdy, durable, and not easily damaged consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The concentrator is not limited to being placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed onto the spiral groove surface through the feeding chute at the head of the rotating groove for sorting. The tail of the rotating groove is installed in a valve type new product selection groove, and the selected new products are divided into three types (or four types) of new equipment along the radial direction according to grade. Change the width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that allows the intercepted multi-directional mineral flow to converge and lead out. The cross section of the spiral chute and the different slopes of the curves are very suitable for sorting fine particle materials. 5、 Applicable fields. The spiral concentrator is suitable for processing 0.6-0.03 millimeters or vein ore and this sand, but it is unfavorable for separation when the mud content is high. Currently, it has been widely used in the processing of iron, tungsten, sand tin, tantalum niobium, coastal or riverside sand mines, as well as sand gold mines. Spiral chute beneficiation experimental report Spiral chute beneficiation experimental report