BL1500 spiral chute

Introduction to BL1500 Spiral Chute 1. The beneficiation process of BL1500 Spiral Chute includes inclined surface flow separation process. The slurry is fed to a partially inclined chute or inclined surface, and with the assistance of water flow, the mineral particle group becomes loose and layered. The light minerals on the upper part are quickly discharged to the outside of the chute, while the heavier minerals on the lower part stagnate in the inner chute or slowly discharge from the lower part. After obtaining each, concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are equipment for mining and beneficiation, making them ideal for sand mining by the sea, riverbanks, sandbanks, and streams. The product has the characteristics of correct structure, simple installation, small footprint, easy operation, stable beneficiation, clear screening of minerals, high processing yield, high efficiency, high beneficiation enrichment ratio, high recycling rate, and stable operation. It has the advantages of light weight, moisture-proof, rust prevention, corrosion prevention, strong adaptability to the fluctuation of feed volume and density, Granularity, and grade. 2、 Working principle. The BL1500 spiral chute fiberglass chute separator is not limited to being placed on the cross (or tripod) of the support table. The uniform mortar is slowly fed onto the spiral groove surface through the feeding chute installed at the head end of the rotating groove for sorting. The tail end is equipped with a valve block type product cutting groove, which divides the selected equipment into three categories (or four categories) radially according to grade. Change the acquisition width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the selected multi head ore flow to converge and export differently. The cross section and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine particle ore materials. bl1500 spiral chute 3. Characteristics and highlights: 1. Heavy duty, high processing yield, and the objective need for contemporary mineral processing to create benefits through economies of scale. 2. Fine granulation: the treatment of fine and small particle size minerals is very important for the treatment of ore materials with a particle size of -0.047MM. The original equipment can basically ensure the recovery of+0.047mm Granularity. How much is the recovery rate of tailing sand ore by spiral chute? 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., the GRP chute has developed from simple application of gravity and water flow blocking force to composite applicable centrifugal force, machine vibration force, magnetic separation force, etc. By using a composite force field, the enrichment of applicable minerals and the separation of fine or fine particles are increased, thereby improving the ore recovery rate. 4. With energy conservation, environmental protection and consumption reduction as the basic starting point, the area and space should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting steps, simple structure, convenient for Computerized maintenance management system. BL1500 spiral chute IV. Classification. The bl1500 spiral chute can be divided into three types according to the particle size of the processed mineral materials: (1) coarse spiral chute. The maximum Granularity of the feed is more than 2-3mm, and the maximum can be 100-200mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral aggregate. (3) The spiral chute of the ore slurry has a feeding particle size of less than 0.074 millimeters. 5、 Purpose: bl1500 spiral chute This machine is suitable for sorting iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon ore, Rutile, monazite, phosphate ore, tungsten ore, tin, tantalum niobium, niobium with a particle size of 0.3-0.02mm and other colored metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. BL1500 Spiral Chute BL1500 Spiral Chute