The company that specializes in mineral processing spiral chutes

The main characteristics of the strong spiral chute in the mineral processing spiral chute are as follows: firstly, the chute separation of minerals belongs to the inclined flow separation process. The mortar is provided with some inclined grooves or inclined surfaces. Under the push of water flow, the mineral particles are loose and layered, and the lighter minerals in the upper layer quickly discharge out of the groove. The heavy minerals in the lower layer are retained inside the groove or discharged slowly from the lower part. After being collected separately, the concentrate and tailings can be obtained. The fiberglass spiral chute is a machine for mining and beneficiation, especially ideal for mining sand in bays, river beds, sandbanks, and streams. The equipment has reasonable structure, simple installation, small footprint, easy operation, stable beneficiation, clear mineral separation, large processing capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and reliable operation. There are also advantages such as light weight, moisture resistance, rust prevention, corrosion resistance, and strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The spiral chute shall be set up with skills, the vertical line shall be calibrated, the iron frame or wood shall be used to fix the suitable position, the sand pump shall be used to transport the ore sand to the two ore inlets above the spiral, the increased water shall be added, and the density of the ore slurry shall be adjusted. The ore slurry shall naturally rotate from high to low, and a coherent centrifugal force shall be generated in the flow speed of the rotating inclined plane to obtain the difference in gravity, Granularity and shape of the sand ore, By utilizing the functions of gravity and centrifugal force generated by swirling flow, the ore and sand are separated. The concentrate flows into the beneficiation hopper and is piped out, while the tailings are discharged into the tailings hopper and moved to the sand pit through a pipeline. Then, they are discharged by a slurry pump, completing the entire beneficiation process. beneficiation spiral chute has three advantages and features: 1. High efficiency, high recovery rate, and correct mineral separation; 2. No power required; 3. Small weight, rust proof, wear-resistant, and not easily corroded. The beneficiation spiral chute has a strong 4 low operating cost and long service life; 5. It is applicable to the fluctuation of feed volume, density, Granularity and grade; The friction formed by the surface of 6 diamond sand makes the beneficiation efficiency better than that of other plastic surfaces. The structure composition of the spiral chute for mineral processing is strong. The fiberglass chute is composed of a feeding device, a cross (tripod), a feeding groove, a rotating groove, a receiving groove, a gathering bucket, and a groove pillar. The function of spiral chutes. 5、 The use of fiberglass chutes in the field is suitable for processing 0.6-0.03MM and vein ores as well as minerals, but it is unfavorable for sorting when the mud content is high. It is now widely used for processing iron ore, tungsten, sand tin, tantalum niobium ore, bay and riverbed ore sand or placer gold, and so on. Which company is strong in mineral processing spiral chutes? @ @ 000 Which company is strong in mineral processing spiral chutes