Spiral chute construction plan

Spiral Chute Construction Plan 1. Explanation: The spiral chute construction plan includes the inclined surface flow sorting process for chute sorting. Mortar is fed to some inclined grooves or slopes. Under the push of water flow, the mineral particle group becomes loose and layered. The upper layer of light mineral material is quickly discharged from the outside of the groove, while the lower layer of heavy mineral is retained inside the groove or slowly discharged from the bottom. After each is taken, the selected ore and tailings can be obtained. The fiberglass chute is a mining and beneficiation machine, especially ideal for sand mining and beneficiation on beaches, rivers, sand banks, and streams. The equipment has the characteristics of appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear screening of minerals, large production capacity, high efficiency, high beneficiation enrichment ratio, high recycling rate, and stable operation. And it has advantages such as light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 The production principle is that the uniformly proportioned slurry is slowly fed to the surface of the spiral groove through the feeding chute installed on the rotating groove head, and sorting is carried out. The bottom of the rotating groove is equipped with a valve block type product selection groove, which divides the selection equipment into three types according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper allows for the differentiation and aggregation of the obtained variable mineral flow. The cross-section of the spiral chute and the slope change of the curve are very suitable for the selection of fine particle materials. spiral chute construction scheme 3. Traits 1. Stable sorting process and simple control 2. Large allowable range of feed density 3. Ultra high enrichment ratio and high recovery rate 4. Small area occupied and small water consumption of coal washing equipment spiral chute. 5. Simple structure, no power required 6. Strong processing capacity 7. Simple installation, easy operation 8. Construction scheme of spiral chute with less investment and quick effect 4. According to the Granularity of processed ore materials, chutes can be divided into three categories: (1) coarse grained chutes, with the maximum particle size of feed of more than 2-3mm, and the maximum particle size of 100-200mm. (2) The ore chute is used to handle 2-3mm sized ores. (3) Slime chute, feeding Granularity is less than 0.074MM. Specification parameters of spiral chute. 5、 This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate ore, tungsten ore, placer tin, tantalum, tantalum niobium ore and other nonferrous metal ores, rare ore gold and non nonferrous metal mineral bodies with specific gravity difference from fine materials with Granularity of 0.3-0.02MM. Spiral Chute Construction Plan Spiral Chute Construction Plan