1.5 meter spiral chute

1.5 meter spiral chute. 1.5 meter spiral chute 1. Description: The spiral concentrator combines the characteristics of spiral chutes, spiral chutes, shakers, and centrifugal gold concentrators. After being evaluated by relevant scientific research, design, schools, or concentrators organized by the Ministry of Metallurgy, it is considered to have excellent mechanical performance, advanced sorting indicators, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This equipment is suitable for sorting iron ore, ferrotitanium, ferrochrome, pyrite, zircon, Rutile ore, monazite ore, phosphate ore, wolframite, tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals and non-metallic mineral bodies with density and specific gravity difference of fine materials with a Granularity of 0.3-0.02 mm. 2、 Application methods. Set up the spiral concentrator, calibrate the vertical line, fix it in a suitable position with iron frame or wood, and send the sand ore to the two ore inlets on the spiral top by the sand pump. Add water and adjust the concentration of the mineral slurry. The mineral slurry naturally swirls from high to low. A coherent centrifugal force occurs in the flow rate of the gyrating inclined plane, and the difference is obtained in the density, specific gravity, Granularity and shape of the mineral sand, Through the influence of the gravity of the swirling flow and the centrifugal force, the ore and sand are separated. The selected ore flows into the concentrate hopper and is piped out, while the tailings flow into the tailings hopper and are moved to the sand pit through a pipeline. Then, they are discharged by a sand pump, completing the entire beneficiation process. 1.5 meter spiral chute 3. Features: 1. Stable selection process, easy to operate. 2. Wide range of allowable changes in feed density. 3. Ultra high enrichment ratio, high recycling rate. 4. Small occupied area and low water consumption. 5. Simple structure without power. 6. Strong processing ability. 7. Easy installation and operation. 8. The 1.5 meter spiral chute with low investment and quick results is a dynamic diagram of the working principle of the 1.5 meter spiral chute. The spiral chute is composed of six parts: a feeding homogenizer, a feeding groove, a rotating groove, a product acquisition groove, an equipment gathering bucket, and a groove support (including a cross or triangular frame). The spiral groove formed by connecting the spiral pieces is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by screws. The selection surface of the rotating groove has a pre made wear-resistant layer. She has the advantages of lightweight, sturdy, and durable consumer goods that are not easily damaged. The head of the spiral groove is equipped with a multi tube feeding homogenizer to sort minerals evenly, which is not cumbersome to operate. The mineral sorting device is freely placed on the cross (or tripod) of the support table. The evenly divided mortar is slowly fed onto the surface of the spiral groove through the feeding chute at the head end of the rotating groove for sorting. The tail of the rotating groove is installed in a valve block type new product selection groove, allowing the selection of new equipment to be divided into three (or four) types of new products radially according to grade. Change the cutting width of each new device by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that distinguishes and converges the obtained multi head ore flows. The horizontal plane of the spiral concentrator is particularly suitable for the separation of small particle ore materials when the slope of the curve changes. 5、 Applicable. This machine is suitable for sorting iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate ore, tungsten ore, tin placer, tantalum niobium ore, tantalum niobium ore and other non-ferrous metals, rare mineral metals and non-metallic ore bodies with gravity difference. 1.5 meter spiral chute 1.5 meter spiral chute