2000 spiral chute

2000 spiral chute. 2000 spiral chute 1. Introduction: The chute sorting belongs to the inclined surface flow sorting process. Mineral mortar is fed to some inclined grooves or slopes, and under the push of water, the mineral particle group is loose and layered. The upper part of the light mineral quickly flows out of the groove, while the lower layer of minerals with a larger proportion stay inside the groove or discharge from the bottom at a low speed. After obtaining the difference, the selected ore and tailings can be obtained. Spiral chutes are machines for mining and beneficiation, making them ideal for sand mining in coastal areas, riverbanks, sandbanks, and river beds. The product has the characteristics of correct structure, simple installation, small land occupation, easy operation, stable beneficiation, clear screening of ore, large production capacity, high efficiency, high beneficiation enrichment ratio, high recycling rate, and reliable operation. It has the advantages of light weight, moisture prevention, rust prevention, corrosion resistance, and strong applicability to fluctuations in feed volume or density, Granularity, and grade. 2、 The disadvantages of the spiral chute are as follows: set up the spiral concentrator, calibrate the vertical line, fix it in a suitable position with iron frame or wood, send the sand ore to the two ore inlets on the spiral roof by the sand pump, mix in the water filling, and adjust the concentration of the mineral slurry. The mineral slurry naturally swirls from high to low. A coherent centrifugal force occurs in the flow rate of the gyratory inclined plane, and the difference in the density, specific gravity, Granularity and shape of the mineral sand is obtained, Through the influence of the gravity of the swirling flow and the centrifugal force, the ore and sand are separated. The selected ore flows into the concentrate hopper and is piped out, while the tailings flow into the tailings hopper and are moved to the sand pit through a pipeline. Then, they are discharged by a sand pump, completing the entire beneficiation process. 2000 Spiral Chute III. Features. 1. The sorting process is stable and easy to operate. 2. The feeding density allows for a large range of different materials. 3. The enrichment ratio is very high, and the recycling rate is high. 4. The land occupation is relatively small, and the water consumption is small. 5. The structure is simple, without the need for power. 6. The processing output is large. 7. The installation is simplified and easy to operate. 8. The input is low and the effect is fast. 2000 spiral chutes are . 4. According to the particle size of the processed ore, chutes can be divided into three types: (1) Coarse chutes, The maximum Granularity of ore feeding is more than 2-3 mm, and the maximum is 100-200 mm. (2) The ore chute handles 2-3 millimeter sized ores. (3) Slurry spiral chute, feeding particle size ＜ 0.074mm. 5、 Scope of application: FRP spiral chute is suitable for separating fine particles of iron, ferrotitanium, ferrochromium, ferrosulfide, tin, tantalum niobium, gold, coal, monazite, Rutile, zircon, rare earth and other metal and non-metallic mineral materials with completely Density contrast. 2000 Spiral Chute 2000 Spiral Chute