Manufacturing of plastic spiral chutes

Manufacturing of Plastic Spiral Chutes I. Equipment Overview. A gravity beneficiation machine that utilizes the continuous centrifugal force generated by slurry in spiral rotation motion to achieve the separation of light and heavy minerals., Plastic spiral chute manufacturing II. Technical principle: The fiberglass spiral chute screening mineral machine does not need to be stacked on the cross (or tripod) of the support table. The uniform mineral mortar is slowly fed onto the surface of the rotating groove through the feeding groove at the beginning of the spiral groove, and the selection is carried out. A valve block type equipment selection slot is installed at the bottom, allowing the sorted products to be divided into three types (or four types) according to grade along the radial direction. Adjust the orientation of the valve block to obtain the width of each device. The product gathering bucket is a concentric circular tube that collects and leads the intercepted multi head ore flow separately. The cross-section of the spiral chute and the slope of the curve change, which is particularly applicable for the sorting of fine particle materials. Manufacturing of plastic spiral chutes 3. Features 1. Stable selection process and easy operation 2. Wide range of allowable changes in feed density 3. High enrichment ratio and high recycling rate 4. Small land area and low water consumption 5. Simple structure, no power required. Can gold be selected for spiral chutes 6. High processing yield 7. Easy installation and easy operation 8. Small investment and quick results Plastic spiral chutes manufacturing 4 According to the particle size of the processed ore, the chute can be divided into three types:. (1) Coarse grained chute, the maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) Slurry spiral chute, feeding particle size ＜ 0.074 mm. 5、 Field of use. Spiral chutes are used for processing 0.6-0.03mm or vein ores and minerals, but high mud content is unfavorable for sorting. It has now been widely used for processing iron, tungsten, sand tin, tantalum niobium mines, beach or river sand mines, and sand gold, among others. Manufacturing of plastic spiral chutes Manufacturing of plastic spiral chutes