Mine spiral chute

Introduction to Spiral Chutes in Mines. The spiral chute combines the characteristics of spiral chutes, fiberglass spiral chutes, shakers, and centrifugal gold concentrators. After relevant scientific research organized by the Ministry of Metallurgy, design, operation and appraisal by departments such as universities and concentrators, it is recognized as having excellent performance, advanced sorting objectives, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has been widely used in non-ferrous and black mining metals. This machine can be used to separate iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosgenite, wolframite, placer tin, tantalite, tantalum niobium ore or other nonferrous metals, rare mineral metals and nonferrous metal minerals with different density and specific gravity. 2、 Using a method to set up a spiral concentrator, align it with the vertical line, use an iron frame or wood to fix it in a suitable position, and use a sand pump to transport the ore to the two feeding ports on the spiral head. Add supplementary water, adjust the concentration of the ore slurry, and the ore slurry will naturally swirl from top to bottom. In the flow rate of the inclined plane of the rotation, an inertial centrifugal force will occur, which will cause differences in the gravity, particle size, and shape of the sand ore, Through the influence of the gravity or centrifugal force of the swirling flow, the sand ore is separated, and the selected ore flows into the concentrate hopper and is piped out. The tailings flow into the tailings hopper and are piped to the sand ore pool, and then discharged by a slurry pump, completing the entire beneficiation process. Mine Spiral Chute III. Highlights and Features 1. High efficiency, high recovery rate, and correct mineral sorting; 2. Do not use power;, The mine spiral chute 3 has a small weight, is rust proof, durable, wear-resistant, and corrosion-resistant; 4. Low cost, long application life; Strong applicability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. Mine spiral chute IV. Types. According to the Granularity of the processed mineral aggregate, the chute can be divided into three types: (1) coarse spiral chute, the maximum particle size of the feeding is more than 2-3mm, and the maximum can reach 100-200mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 Adopting the field spiral chute BL-1500. Spiral chutes are suitable for processing 0.6-0.03 millimeters or vein ore and this sand ore, but high mud content is unfavorable for sorting. Currently, it has been widely used for processing iron ore, tungsten, tin placer, tantalum niobium ore, bay and riverbank placer or placer gold, and so on. Mine spiral chute Mine spiral chute