Can gold be selected using spiral chutes

Can gold be selected using spiral chutes. 1、 Overview The gravity beneficiation spiral chute is a combination of the characteristics of spiral concentrator, spiral concentrator, shaking table, and centrifuges for beneficiation. It has passed the appraisal by the Ministry of Metallurgical Industry for organizing relevant scientific research, design, universities or concentrators, and other units. It believes that this kind of equipment has superior performance, progress in sorting indicators, and has won the Science and Technology Research Achievement Award of the Ministry of Metallurgical Industry. Now it has been widely used in non-ferrous and Ferrous metals. This machine is suitable for separating fine materials with a particle size of 0.3-0.02 mm to obtain iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphate rock, tungsten ore, cassiterite, tantalum, niobium ore and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. 2、 Technical principles. The fiberglass spiral chute mineral separator is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the end of the rotating groove head for sorting. The tail is equipped with a valve type product selection slot, which divides the selection equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to gather and lead out. The cross section of the spiral chute is particularly suitable for the selection of fine ore particles due to changes in the slope of the curve. Can gold be selected using a spiral chute at . 3、 Features and advantages: 1. Ultra large-scale, large processing capacity, modern mineral processing principles require large-scale creation of benefits. 2. Fine granulation refers to the treatment of fine and small mineral particles, especially the treatment of mineral materials with a particle size of -0.047mm. Originally, the mechanical system could fundamentally ensure the recovery of+0.047mm particles. 3. With the development of Hydraulics, two-phase flow and equipment vibration, spiral chutes have developed from simple use of gravity and water resistance to composite application of centrifugal force, mechanical vibration force, magnetic force, etc. Through a composite force field, the enrichment of useful minerals and the separation of fine and fine particles are increased, resulting in an increase in ore recovery rate. 4. Based on energy saving, environmental protection and consumption reduction, it needs to occupy a small area, space, water and electricity consumption. 5. The simple operation is flexible, the sorting process is stable, and the structure is simple, which is convenient for Computerized maintenance management system. The use of spiral chutes can select gold at a rate of , and the use of spiral chutes can select gold at a rate of 4. The structure of the fiberglass chute is composed of six parts: a feeding homogenizer, a feeding groove, a spiral groove, a product selection groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The rotating groove connected by spiral plates is a key component. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and is bolted together, with a pre made durable and wear-resistant layer on the selected surface of the spiral groove. It has the advantages of lightweight, sturdy, and long-lasting consumables. The head of the rotating groove is equipped with a multi tube ore feeder to evenly separate minerals, making it easy to control. The sorting machine is not limited to stacking on the cross (or tripod) of the support table. Uniform mineral mortar is slowly fed onto the rotating groove surface through the feeding chute at the end of the spiral groove head, and sorting is carried out. The bottom of the spiral groove is installed in a valve block type new product cutting groove, allowing other new equipment to be selected and classified into three types (or four types) of new equipment along the radial direction according to grade. Change the acquisition width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that gathers and leads out the selected multi head ore flow. The lateral plane of the spiral concentrator, with a change in the slope of the curve, is extremely suitable for the separation of fine particle materials. 5、 Scope of utilization. Spiral concentrators are suitable for processing 0.6-0.03mm or vein ores and minerals, but high mud content is unfavorable for separation. Nowadays, it is widely used for processing iron ore, tungsten, tin, tantalum niobium ore, bay or riverbank ore sand, and gold ore. Can gold be selected using a spiral chute? Can gold be selected using a spiral chute