Management Measures for Spiral Chute Surface

Overview of spiral chute surface management method I. The gravity concentration spiral chute summarizes the characteristics of gravity concentration spiral chute, gravity beneficiation spiral chute, shaking table and gold concentrator centrifuge. It has passed the appraisal by the relevant scientific research organized by the Ministry of Metallurgy, the design, the university and the concentrator. It believes that this kind of mechanical performance is superior, the selection index is advanced, and it has won the Science and Technology Research Achievement Award of the Ministry of Metallurgical Industry. Now it has been widely used in non-ferrous and Ferrous metals. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate ethylene, tungsten sand, sand tin, tantalum, tantalum niobium and other nonferrous metals, rare metals and non nonferrous gold mineral bodies with gravity difference from fine materials with Granularity of 0.3-0.02 mm. 2、 Technical principle: Specification parameters of mineral processing spiral chute. The uniform slurry is slowly fed onto the surface of the spiral groove through the feeding groove installed at the head of the rotating groove for sorting. The tail end of the rotating groove is equipped with a valve block type equipment to cut the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi-directional mineral flow to be collected and led out differently. The transverse plane of the fiberglass spiral chute has a slope change curve, which is particularly suitable for the separation of small particle materials. Method 3 for the management of the surface of the spiral chute. Characteristics. Fiberglass spiral chute has attracted more attention among many gravity separation machines due to its low power consumption, simple structure, small area occupation, simple operation, stable beneficiation, clear beneficiation, no moving parts, convenient Computerized maintenance management system, large processing capacity per unit area and other characteristics. The machine has a wide and relatively stable groove surface, and the mortar has a large area of laminar flow, which is more suitable for processing ores with medium and fine (-4mm) Granularity. Glass fiber reinforced plastic chutes with diameters of 400, 600, 900, and 1200MM have been manufactured domestically, Ф The production capacity of 1200mm four heads is about 4-6 tons/hour. Spiral chute surface management method 4. Structural composition. The fiberglass chute is composed of a feeding device, a cross (tripod), a feeding groove, a rotating groove, a receiving groove, a gathering bucket, and a groove pillar. 5、 Applicable. This product is applicable to sorting iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, wolframite, cassiterite, tantalite, niobium ore with 0.3-0.02mm fine particles and other non-ferrous metal ores, rare mineral metals and non-metallic minerals with specific gravity difference. Management Measures for Spiral Chute Surface Management Measures for Spiral Chute Surface