Rotating Spiral Chute Work Video

Video 1 on the Work of a Rotating Spiral Chute: Explain what type of mine the 2000 spiral chute is suitable for. Due to its low environmental pollution and cost, gravity separation is widely used in the beneficiation of metal or non-ferrous metal ores. Spiral chute is one of the gravity beneficiation machinery, with a structural characteristic of a cubic parabolic shape on the cross-section, suitable for handling finer particle sizes of -0.2mm. During the beneficiation process, do not add water for flushing, and divide the end of the chute into sections to obtain fine, medium, and tailings. Make spiral chutes by pulling gold. 2、 The technical principle is the same: the mortar is slowly fed to the rotating groove surface through a feeding groove installed on the spiral groove head for sorting. The tail end of the spiral groove is equipped with a valve block type product cutting groove, which divides the selected equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi head ore flow to be differentiated and aggregated for export. The cross section of the spiral concentrator has different slopes, which is particularly suitable for the separation of small particle ore materials. Video 3: Highlights or Characteristics 1: Extremely high efficiency, high recovery rate, and accurate beneficiation of the rotating spiral chute; 2. No power required; 3. Lightweight, rust resistant, durable, wear-resistant, and corrosion-resistant; 4. Low cost operation, long service life; 5. Strong adaptability to fluctuation of feed volume, density, Granularity and grade; Spiral chute model. The friction force on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. Working video of rotary spiral chute IV. According to the particle size of processed mineral materials, the chute can be divided into three types: (1) coarse spiral chute, the maximum Granularity of feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral aggregate., (3) Slurry spiral chute, feeding particle size ＜ 0.074 mm. 5、 Scope of application The spiral chute can be used to separate fine grained iron, ferrotitanium, ferrochrome, ferrosulfide, tin ore, tantalum niobium, gold ore, coal, monazite, Rutile, zircon, rare earth and other metals and nonferrous metals with a completely different specific gravity. Rotating Spiral Chute Work Video Rotating Spiral Chute Work Video