Calculation of spiral chute grade

Spiral chute grade calculation: 1. Explanation: Spiral chute official website. Due to low environmental pollution and low cost, gravity separation is widely used in the beneficiation of metal or non-ferrous metal ores. Spiral chute is one of the gravity beneficiation machinery, with a structural characteristic of a cubic parabolic shape on the cross-section, suitable for handling finer particle sizes of -0.2mm. During the beneficiation process, do not add water for flushing, and divide the end of the chute into sections to obtain fine, medium, and tailings. 2、 The usage method is to make the fiberglass chute stand up, align it with the vertical line, fix it in the appropriate position with an iron frame or wood, and send the sand ore to the two feeding ports on the top of the spiral through a slurry pump. The water is added and the mineral slurry concentration is adjusted. The mineral slurry naturally swirls from high to low, and an inertial centrifugal force occurs in the rotating inclined flow rate, which is distinguished by the gravity, particle size, and state of the mineral sand, By utilizing the gravity or centrifugal force of the swirling flow, the ore and sand are separated. The selected ore flows into the concentrate hopper and is piped out, while the tailings flow into the tailings hopper and are moved to the sand pit through a pipeline. Then, they are discharged by a mortar pump, completing the entire beneficiation process. The production of spiral chutes in coal bunkers, grade calculation of spiral chutes at , advantages and characteristics. 1. Stable, easy to control, with a large concentration range. 2. Strong production and processing capacity of mineral materials, ultra-high enrichment ratio, and high recovery probability. 3. Small footprint, low water consumption, simple structure, and no need for power. 4. Easy to install, easy to operate, minimal investment, and fast recovery of benefits. Grade calculation of spiral chute IV. According to the size of ore processed, the chute can be divided into three categories: (1) coarse spiral chute. The maximum Granularity of ore feeding is above 2-3MM, and the maximum can reach 100-200mm. (2) The sand ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding particle size less than 0.074 millimeters. Video of on-site production of spiral chutes. Spiral chute effect, spiral chute grade calculation V. Scope of application Spiral concentrator is applicable to the separation of fine grained iron ore, Ilmenite, Chromite, pyrite, placer tin, tantalum niobium ore, placer gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore or other metal and non-metallic mineral materials with sufficient specific gravity difference. Calculation of Spiral Chute Grade Calculation of Spiral Chute Grade