Spiral chute reinforcement

Spiral Chute Reinforcement I. Introduction. The gravity concentration spiral chute is a combination of the characteristics of gravity concentration spiral chute, spiral concentrator, shaking table, centrifugal gold concentrator. After the Ministry of Metallurgical Industry organized relevant scientific research, design, universities, mineral processing enterprises and other units to carry out appraisal, it is considered that the mechanical performance is superior, the separation index is advanced, and it has won the scientific and technological research achievement award of the Ministry of Metallurgical Industry. Now it has been widely used in non-ferrous and Ferrous metals. This machine is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten sand, sand tin, tantalum niobium ore, niobium and other non-ferrous metals, rare metals and non colored metal minerals with different specific gravity from fine materials with a Granularity of 0.3-0.02 mm. The setting of the spiral chute concentrate trough is based on the same technical principle. The mortar is slowly fed to the rotating trough surface through the feeding trough installed on the spiral trough head for sorting. The tail end of the spiral groove is equipped with a valve block type product cutting groove, which divides the selected equipment into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi head ore flow to be differentiated and aggregated for export. The cross section of the spiral concentrator has different slopes, which is particularly suitable for the separation of small particle ore materials. Reinforcement of Spiral Chute at III. Advantages and Features Spiral Chute Structure Diagram. 1. Stable, easy to control, with a large concentration range. 2. Strong production and processing capacity of mineral materials, ultra-high enrichment ratio, and high recovery probability. 3. Small footprint, low water consumption, simple structure, and no need for power. 4. Easy to install, easy to operate, minimal investment, and fast recovery of benefits. Spiral chute reinforcement IV, category. According to the particle size of the ore materials processed, the chutes can be divided into three categories: (1) Coarse grained chutes. The maximum Granularity of the feed is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The slurry spiral chute, with a feeding particle size of less than 0.074mm. 5、 Applicable. This machine can be used to separate iron ore, Ilmenite, Chromite, pyrite, zircon ore, Rutile, monazite, phosgenite, wolframite, cassiterite, tantalum, niobium and other nonferrous metals, rare mineral metals and nonferrous metal mineral bodies with specific gravity difference from fine materials with Granularity of 0.3-0.02MM. Spiral chute reinforcement Spiral chute reinforcement