PPR spiral chute

The usage principles of PPR spiral chutes and spiral chutes. 1、 Gravity beneficiation is widely used in the beneficiation of metallic and non-metallic minerals due to its small environmental pollution and low cost. The fiberglass chute is one of the gravity separation equipment, with a structural feature of a cubic parabolic cross-section, suitable for handling finer particle sizes of -0.2mm. During the sorting step, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the bottom of the chute. 2、 Working principle. The average slurry passes through the head of the spiral groove and is slowly fed onto the rotating groove surface for sorting. The tail of the spiral groove is equipped with a valve type equipment to obtain the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each equipment, the product gathering hopper allows the selected multi-directional mineral flow to converge and lead out. The slope change of the horizontal plane and curve of the spiral concentrator is very suitable for the selection of fine particle materials. PPR Spiral Chute III. Characteristics. This product is suitable for separating 0.3-0.02mm fine materials to obtain iron ore, ilmenite, chromite, pyrite, zircon, Rutile, monazite, phosphate rock, tungsten sand, placer tin, tantalum, tantalum niobium and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different densities and specific gravity. This equipment also has stable and easy to operate selection processes, a wide range of allowable changes in feed density, high enrichment ratio, high recycling rate, small land occupation, low water consumption, simple structure, no need for power, strong processing ability, easy installation, easy operation, low investment, and quick effectiveness. PPR spiral chute 4. Structural composition. The PPR spiral chute spiral concentrator is composed of 6 parts, including a feeding homogenizer, a feeding chute, a rotating groove, a product intercepting groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the spiral pieces is the main component. The rotating plate is made of fiberglass reinforced coal gangue and connected together through screws. The sorting surface of the rotating groove has a pre made durable wear-resistant layer. It also has the advantages of lightweight, sturdy, durable, and durable consumer goods. The head of the spiral groove is equipped with a multi tube ore feeder to evenly separate minerals, and the control is not complicated. The concentrator is not limited to being placed on a cross (or tripod) on a support table. The evenly distributed mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the beginning of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve type new product acquisition groove. The selected new products are divided into three (or four) types of new equipment along the radial direction according to grade. Change the selection width of each new product by adjusting the orientation of the valve block. The new product gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be collected and exported separately. The cross section and slope of the spiral chute are extremely suitable for the selection of fine particle materials. Working video of rotary spiral chute, PPR spiral chute V. Application field: glass fiber reinforced plastic chute is suitable for separating fine iron ore, Ilmenite, Chromite, pyrite, tin ore, tantalum niobium ore, placer gold, coal mine, monazite ore, Rutile ore, zircon ore, rare earth ore, and other metal and nonferrous metal minerals with complete density ratio difference. PPR spiral chute PPR spiral chute