Installation standards for spiral chutes

Spiral chute installation standard 1. Description: spiral chute installation Standard gravity beneficiation is widely used in the beneficiation of metal ore and non-metallic ore because of low pollution and low cost. The spiral concentrator is one of the gravity separation machines, with a structural feature that the cross-section presents a cubic parabolic shape, suitable for processing finer particle sizes of -0.2mm. In the sorting process, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the tail end of the tank. 2、 Working principle. The spiral chute is installed with a standard spiral mineral separator, and the mineral separator is freely placed on the cross (or tripod) of the support table. The same mortar is slowly fed onto the spiral groove surface through a feeding chute installed on the rotating groove head for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the sorted products to be divided into three (or four) categories according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that distinguishes and converges the intercepted multi-directional mineral flow. The transverse surface of the fiberglass chute and the slope change of the curve are very suitable for selecting fine-grained materials. Installation standard for spiral chutes at . 3、 Traits and highlights 1. Heavy processing, large processing output, and the overall demand of contemporary mineral aggregate processing is to use scale effect to build revenue. 2. Fine granulation is used for the treatment of fine and small particle grade mineral materials, especially for minerals with a particle size of -0.047mm. The original machinery can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow, mechanical vibration, etc., the spiral chute has developed from the simple application of gravity and flow resistance to the composite application of centrifugal force, equipment vibration force, magnetic force, etc. By using a composite force field, the enrichment of useful mineral materials and the separation of fine and micro particles are increased, thereby improving the mineral recovery rate. 4. Based on energy conservation, environmental protection and consumption reduction, the land area and space occupied should be small, and water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting process, simple structure, and convenient maintenance management. The installation standard for spiral chutes is . 4、 The structural composition of the fiberglass chute is composed of a feeding homogenizer, a cross (tripod), a feeding trough, a rotating trough, a selection trough, a gathering hopper, and a trough pillar. 5、 Applicable. This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphorus, tungsten ore, placer tin ore, tantalum niobium, niobium ore and other nonferrous metals, rare mineral metals and nonferrous metal mineral bodies with gravity difference from small materials with Granularity of 0.3-0.02MM. Installation standard for spiral chutes Installation standard for spiral chutes