Spiral chute BL-1500

Spiral chute BL-1500. 1、 Product Overview: A gravity beneficiation machine that utilizes the continuous centrifugal force that occurs during the spiral rotation movement of mineral pulp to concentrate lightweight and heavy minerals. 2、 Operating principle. The spiral concentrator screening mineral device is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed on the rotating groove head, and the selection is carried out. The bottom is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) types according to grade along the radial direction. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that aggregates and leads out the obtained multi head ore flow. The transverse section of the fiberglass chute and the change in slope of the curve are particularly suitable for the selection of small particle materials. Spiral Chute BL-1500 III. Highlights and Features 1: Ultra high efficiency, high recycling rate, accurate mineral screening; 2. No power required; The difference between spiral chute grooving and non grooving is that the spiral chute BL-1500 3 is light in weight, rust resistant, durable, wear resistant, and corrosion-resistant; 4. Low cost and long service life; 5. Strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade; The friction force formed by the surface of 6 diamond sand makes the beneficiation effect superior to other plastic surfaces. Spiral chute bl-1500 IV. According to the particle size of processed mineral materials, the chute can be divided into three types: (1) coarse spiral chute, the maximum Granularity of feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) Mineral sand chute, processing 2-3MM particle grade mineral aggregate. (3) The spiral chute of the ore slurry has a feeding particle size of less than 0.074 millimeters. 5、 Application. This product is suitable for separating small materials with Granularity of 0.3-0.02MM to get iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten sand, sand tin, tantalum niobium ore, tantalum niobium ore and other non-ferrous metals, rare mineral metals and non nonferrous metal mineral bodies with gravity difference. Spiral chute bl-1500 Spiral chute bl-1500