What is the closed circuit connection diagram of a spiral chute

What is the closed circuit connection diagram of spiral chutes? 1. Overview of surface repair of spiral chutes. Gravity beneficiation spiral chutes summarize the characteristics of fiberglass spiral chutes, fiberglass spiral chutes, shakers, and centrifugal concentrators. After being evaluated and approved by relevant scientific research, design, universities, and mining departments organized by the Ministry of Metallurgical Industry, they are recognized as having superior performance and advanced selection indicators, and have been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry, Now it is widely used in nonferrous and Ferrous metals. This equipment is suitable for separating fine and small materials with Granularity of 0.3-0.02mm to obtain iron, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus and ethylene, tungsten ore sand, cassiterite, tantalum, niobium ore and other non-ferrous metals, rare mineral metals and this non-ferrous metal ore body with different specific gravity. 2、 Working principle: The specifications and parameters of the spiral chute for mineral processing. What is the closed circuit connection diagram of the spiral chute? The fiberglass spiral chute concentrator does not need to be restricted from being placed on the cross (or tripod) of the support table. The same mineral mortar is slowly fed onto the surface of the rotating groove through the feeding chute installed at the head of the spiral groove for sorting. A valve type equipment is installed at the tail to obtain a slot, allowing the selected products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each device by adjusting the orientation of the valve block. The product gathering bucket is a concentric circular tube that differentially merges and leads out the intercepted multi-directional mineral flow. The transverse plane and slope of the curve of the spiral concentrator are particularly suitable for the separation of fine-grained materials. What is the closed circuit connection diagram of a spiral chute? 3. Advantages and characteristics: 1. Stable, easy to control, and a relatively large concentration range. 2. Strong material production and processing capabilities, high enrichment ratio, and high recycling probability. What is the closed circuit connection diagram of a spiral chute? 3. It takes up less space, uses less water, is simple in construction, and does not require power. 4. Easy to install, easy to operate, minimal investment, and fast recovery of benefits. What is the closed circuit connection diagram of a spiral chute. 4、 The structural composition of the fiberglass chute consists of six parts: a feeding homogenizer, a feeding trough, a rotating trough, an equipment intercepting trough, a product gathering hopper, and a trough bracket (including a cross or tripod). The spiral groove formed by the connection of rotating discs is a key component. The spiral plate is made of fiberglass (fiberglass reinforced with coal gangue) and connected together by bolts. The sorting surface of the rotating groove has a pre made wear-resistant layer. It has the advantages of lightweight, solid, and durable consumer goods. The spiral groove is equipped with a multi tube feeding homogenizer to divide ore evenly, making it easy to operate. The mineral sorting machine does not need to be placed on a cross (or tripod) on a support table with restricted stacking. The evenly divided slurry is slowly fed onto the surface of the spiral groove through the feeding chute installed on the rotating groove head, and sorting is carried out. The tail of the rotating groove is installed in a valve block type new product acquisition groove, and the new equipment will be sorted radially into three categories (or four types) of new products according to grade. Change the selection width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that allows the intercepted and variable mineral flows to be separated and led out densely. The cross section of the spiral concentrator and the slope change of the curve are particularly suitable for the separation of fine particle materials. 5、 Utilize the field. The fiberglass chute is suitable for processing 0.6-0.03MM and vein ore as well as minerals, but it is unfavorable for sorting when the mud content is high. It is now widely used for processing iron ore, tungsten, sand tin, tantalum niobium ore, bay and riverbed ore sand or placer gold, and so on. What is the closed circuit diagram of a spiral chute