The latest technology of spiral chutes

The latest technology of spiral chutes: 1. Introduce the beneficiation chutes, including the inclined flow separation process. Mineral mortar is applied to a partially inclined chute or inclined surface. With the assistance of flowing water, the mineral particle group is not tightly fastened and layered. The upper part of the light mineral material quickly flows out of the groove, while the lower part of the heavy mineral material stagnates in the inner groove or slowly flows out from the lower part. After distinguishing and connecting, the concentrate and tailings can be obtained. Can spiral chutes be used for coal preparation? The latest technology of spiral chutes is that spiral chutes are machinery for mining and beneficiation, especially ideal for sand mining in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear screening of ore, large production capacity, high efficiency, high beneficiation enrichment ratio, high recovery probability, and stable operation. It has the advantages of light weight, moisture prevention, rust prevention, strong corrosion resistance, and strong applicability to feed volume and density, Granularity, and grade fluctuation. 2、 Operating principle: The spiral concentrator does not need to be restricted to placing the mineral separator on the cross (or tripod) of the support table. The same slurry is slowly fed to the rotating groove surface through the feeding groove on the spiral groove head, and sorting is carried out. The bottom is equipped with a valve block type product selection slot, which divides the selected equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the position of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The transverse surface of the spiral chute and the slope change of the curve are extremely suitable for the selection of fine particle materials. The latest technology of the spiral chute 3. Advantages and characteristics: 1. Extremely high efficiency, high recycling rate, and precise screening of ore; 2. No power required. 3. Lightweight, rust resistant, wear-resistant, and corrosion-resistant; 4. Low cost and long application life; 5. Strong adaptability to fluctuation of ore feeding amount, concentration, Granularity and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation efficiency better than other plastic surfaces. The latest technology of spiral chute IV. According to the processed Granularity of mineral materials, the chute can be divided into three types: (1) Coarse grained chute. The maximum Granularity of feeding material is more than 2-3mm, and the maximum can reach 100-200MM. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) The spiral chute of the ore slurry has a feeding particle size of less than 0.074 millimeters. 5、 Applicable. This machine is suitable for sorting iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate ore, tungsten ore, tin placer, tantalum niobium ore, tantalum niobium ore and other non-ferrous metals, rare mineral metals and non-metallic ore bodies with gravity difference. The Latest Technology of Spiral Chutes The Latest Technology of Spiral Chutes