Seven coil spiral chute

Seven circle spiral chute 1. Describe the digital spiral chute. The sorting of minerals by the chute belongs to the step of inclined flow sorting. Mineral mortar is provided on partially inclined inclined chutes or slopes. With the assistance of flowing water, the mineral particle group is not tight and layered. The upper part of the light mineral quickly flows out of the groove, while the lower layer of minerals with a larger proportion stay inside the groove or discharge from the bottom at a low speed. After being connected, concentrate and tailings can be obtained. Spiral chutes are machinery for mining and beneficiation, especially ideal for mineral mining in coastal areas, riverbanks, sandbanks, and streams. The product also has the characteristics of reasonable structure, simple installation, small footprint, simple operation, stable beneficiation, clear screening of ore, high yield, high efficiency, high beneficiation enrichment ratio, high recycling rate, and reliable operation. It has the advantages of small weight, moisture prevention, rust prevention, durability and corrosion resistance, and strong applicability to the fluctuation of feed volume and density, Granularity, and grade. 2、 Technical principle: How to cut the spiral chute. The average mineral mortar is slowly fed onto the rotating groove surface through a feeding groove installed at the head of the spiral groove for sorting. The tail of the spiral groove is equipped with a valve type product selection groove, which divides the selection equipment into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each product, the equipment gathering hopper enables the multi-directional mineral flow to be differentiated and converged. The transverse surface of the fiberglass chute and the slope change of the curve are particularly suitable for the selection of fine particle materials. Seven Circle Spiral Chute 3. Highlights: New type of grooved spiral chute, 1. Stable, easy to control, with a relatively large concentration range. 2. The material production and processing capacity is large, with a high enrichment ratio and a high probability of recovery. 3. The area is not occupied much, consumes less water, has a simple structure, and does not require power. 4. Easy installation, simple operation, low investment, and quick returns. Seven circle spiral chute 4. Structure composition, the seven circle spiral chute fiberglass chute is composed of a feeding equalizer, a cross (tripod), a feeding chute, a rotating chute, a receiving chute, a gathering bucket, and a trough support. 5、 Application field. Fiberglass spiral chute is suitable for separating fine grained iron, ferrotitanium, ferrochrome, ferrosulfide, sand tin, tantalum niobium, placer gold, coal, monazite, Rutile, zircon sand, rare earth and other metal and nonferrous metal minerals with completely sufficient specific gravity difference. Seven coil spiral chute Seven coil spiral chute