Spiral chute polyurethane

Spiral Chute Polyurethane 1. Product Introduction. Spiral chute polyurethane is a gravity separation equipment that uses the inertial centrifugal force generated by mortar in spiral motion to achieve the separation of light and heavy minerals., 2、 The working principle is the same: mineral mortar is slowly fed onto the rotating groove surface through the feeding chute installed at the end of the spiral groove head, and sorting is carried out. The bottom of the spiral groove is equipped with a valve block type product cutting groove, and the selected equipment is divided into three types according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected multi head ore flow to be aggregated and exported. The cross section of the spiral concentrator and the change in slope of the curve are very suitable for the selection of fine-grained ore materials. Spiral Chute Polyurethane III. Characteristics and Advantages. 1. Ultra large-scale and large processing capacity, modern mineral processing objectively creates benefits based on scale. 2. Fine granulation: for the treatment of fine minerals, especially for the treatment of ores with a particle size of -0.047mm, the original machine can generally ensure the recovery of+0.047mm Granularity. 3. With the development of Hydraulics, two-phase flow, equipment vibration, etc., GRP chutes have developed from simple use of gravity and water blocking force to composite use of centrifugal force, mechanical vibration force, magnetic separation force, etc. Through a composite force field, the enrichment of applicable minerals and the separation of fine particles from these fine particles are enhanced, thereby improving the recovery rate of ore materials. 4. The basic starting point is to save energy, reduce energy consumption and protect the environment. The area and space occupied should be small, and the water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting steps, simple structure, convenient for Computerized maintenance management system. Spiral chute polyurethane . 4、 According to the Granularity of the processed mineral materials, the chutes can be divided into three categories: (1) coarse particle spiral chutes, the maximum particle size of ore feeding is more than 2-3mm, and the maximum can be 100-200mm. (2) The sand ore chute is used to handle 2-3MM sized ores. (3) Slurry chute, feeding Granularity is less than 0.074mm. 5、 The application range of fiberglass spiral chute is to handle 0.6-0.03 millimeters or vein ores and minerals, but it is unfavorable for sorting when the mud content is high. At present, it has been widely used for processing iron ore, tungsten, tin ore sand, tantalum niobium, coastal and river placers, and placer gold mines. Spiral chute polyurethane Spiral chute polyurethane