Spiral chute feeding

Spiral Chute Feeding 1. Product Overview: A gravity beneficiation machine that utilizes the continuous centrifugal force generated by the slurry in the spiral rotary motion to achieve lightweight and heavy mineral separation. 2、 The uniform working principle of the mortar is slowly fed onto the surface of the spiral groove through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The bottom of the rotating groove is equipped with a valve block type product cutting groove, and the selected equipment is divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the acquisition width of each product, the equipment gathering hopper allows the selected variable ore flow to be differentiated and converged for export. The cross-section of the spiral chute and the slope of the curve change, which is very suitable for the sorting of small particle materials. Spiral chute ore feeding III. Features This machine is suitable for separating fine materials with Granularity of 0.3-0.02mm to get iron ore, Ilmenite, Chromite, pyrite, zircon sand, Rutile, monazite, phosphorus, tungsten, tin, tantalum niobium, niobium and other non-ferrous metals, rare mineral metals and non-ferrous metal minerals with different specific gravity. This equipment has the advantages of stable sorting steps, simple control, wide range of ore concentration tolerance, high enrichment, high recovery rate, small land occupation, low water consumption, simple structure, no power required, large output, easy installation, simple operation, small investment, and quick effectiveness. The spiral chute for ore feeding is composed of six parts: a feeding homogenizer, a feeding chute, a spiral groove, a product cutting groove, an equipment gathering hopper or groove support (including a cross or triangular frame), and a fiberglass spiral chute. The rotating groove connected by the rotating disc is a key component. The spiral plate is made of fiberglass (fiber reinforced coal gangue) and connected together by bolts. The sorting surface of the spiral groove has a pre made durable and wear-resistant layer. He also has the advantages of lightweight, strong, and durable consumables. The head of the rotating groove is equipped with a multi tube feeding homogenizer to sort minerals evenly, which is easy to control. The ore separator is not restricted from being placed on the cross (or tripod) of the support table. The evenly distributed mortar is slowly fed onto the surface of the rotating groove through a feeding groove installed at the end of the spiral groove head, and selected for operation. The tail end of the spiral groove is installed in a valve block type new product selection groove, allowing the sorting equipment to be divided into three types (or four types) of new products along the radial direction according to grade. Change the acquisition width of each new product by adjusting the position of the valve block. The new equipment gathering bucket is a concentric circular tube that converges and leads out the intercepted multiple ore flows. The lateral plane of the spiral concentrator and the change in slope of the curve are particularly suitable for the selection of small particle ore materials. 5、 Use This machine is suitable for separating iron, ferrotitanium, ferrochrome, ferrosulfide, zircon, Rutile, monazite, phosphate rock, tungsten ore, tin, tantalum niobium, tantalum niobium and other non-ferrous metal ores, rare ore metals and non-metallic minerals with specific gravity difference from 0.3-0.02mm fine materials. Spiral chute feeding Spiral chute feeding