Surface repair of spiral chutes

Surface repair of spiral chutes: 1. Description: Spiral concentrators summarize the characteristics of gravity beneficiation spiral chutes, fiberglass spiral chutes, shakers, and centrifugal gold concentrators. After scientific research organized by the Ministry of Metallurgy, appraisal conducted by departments such as design, universities, and concentrators, it is recognized that this type of equipment has excellent performance, advanced sorting indicators, and has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It is now in the field of non-ferrous metals Ferrous is widely used. This machine is applicable to sorting iron ore, ilmenite, chromite, pyrite, zircon sand, Rutile, monazite, phosphorus ethyl, tungsten, cassiterite, tantalum, niobium of 0.3-0.02 mm fine materials, and other non-ferrous metals, rare mineral metals or non-metallic minerals with gravity difference. 2、 The mineral mortar with the same working principle is slowly fed onto the surface of the spiral groove through the feeding groove at the beginning of the rotating groove, and then selected for operation. The tail of the rotating groove is equipped with a valve type product acquisition groove, and the sorting equipment is divided into three categories according to grade along the radial direction. By adjusting the position of the valve block to change the cutting width of each product, the equipment gathering hopper enables the selected multi-directional mineral flow to be densely led out. The transverse plane of the fiberglass spiral chute has a change in the slope of the curve, which is extremely suitable for the selection of fine particle materials. Spiral chute surface repair 3. Characteristics and advantages 1. Large scale and large processing output. In principle, the current conditions for processing mineral materials are to create profits with scale efficiency. 2. Fine granulation, for the treatment of fine particle level minerals, especially for the treatment of mineral materials with a particle size of -0.047mm, the original machine can basically ensure the recovery of+0.047mm particle size. 3. With the development of Hydraulics, two-phase flow and equipment vibration, the spiral concentrator has developed from the simple application of gravity and water resistance to the combined application of centrifugal force, mechanical vibration force, magnetic force, etc. Through a composite force field, the enrichment of useful mineral materials or the separation of fine and fine particles can increase the mineral recovery rate. 4. With energy conservation and environmental protection as the fundamental starting point, the area and space occupied should be small, and water and electricity consumption should be small. 5. Simple and flexible operation, stable sorting process, simple structure, and easy maintenance management. The spiral chute surface repair IV. According to the Granularity of the processed ore, the chute can be divided into three types: (1) coarse size chute, the maximum particle size of ore feeding is more than 2-3MM, and the maximum can reach 100-200mm. (2) The ore chute is used to handle 2-3mm sized ore materials. (3) Slurry chute, feeding Granularity is less than 0.074MM. 5、 Scope of application The spiral chute can be used to separate fine grained iron, ferrotitanium, ferrochrome, ferrosulfide, tin ore, tantalum niobium, gold ore, coal, monazite, Rutile, zircon, rare earth and other metals and nonferrous metals with a completely different specific gravity. Surface repair of spiral chute Surface repair of spiral chute