Is water supplied during the operation of the spiral chute

Is there water distribution during the operation of spiral chutes? 1. Overview of chute sorting, including the steps of inclined flow sorting. Mortar is provided in some inclined grooves or inclined surfaces. With the assistance of flowing water, the mineral particle group is not tightened and layered. The lighter mineral material on the upper part is quickly discharged out of the groove, while the heavy mineral on the lower layer is trapped in the groove or flows out at a low speed from the lower part. After being distinguished and connected, concentrate and tailings can be obtained. Glass fiber reinforced plastic chutes are equipment for mining and beneficiation, especially ideal for mineral mining and beneficiation at seaside, riverbank, sand bank, and creek banks. The product also features appropriate structure, simple installation, small footprint, easy operation, stable beneficiation, clear separation of ore, high processing yield, high efficiency, high beneficiation enrichment ratio, high recovery rate, and reliable operation. It has the advantages of light weight, moisture-proof, rust proof, durable and anti-corrosion, and strong applicability to the fluctuation of feed volume or density, Granularity, and grade. 2、 Using techniques to establish a fiberglass spiral chute, align it with the vertical line, use an iron frame or wood to fix it in the appropriate direction, and use a sand pump to deliver the mineral sand to the top two feeding ports of the spiral. It is mixed with replenishing water to adjust the concentration of the mineral slurry. The mineral sand slurry naturally swirls from high to low, generating a single inertial centrifugal force in the rotating inclined flow rate, which varies in the specific gravity, particle size, and shape of the mineral sand, Through the influence of the gravity and centrifugal force of the swirling flow, the ore is separated, and the selected ore is discharged into the concentrate hopper and connected out through pipelines. The tailings enter the tailings hopper and are connected to the sand tank through pipelines, and then discharged by a mortar pump, completing the entire beneficiation process. Does the spiral chute work with water distribution? 3. Characteristics 1. Stable selection steps and easy operation. 2. Large allowable range of feed density. 3. Very high enrichment ratio and high recovery probability. 4. Small area occupied and low water consumption. 5. Simple structure and no power. 6. Strong processing capacity. 7. Simple installation and operation. 8. Small investment and quick results. Do the spiral chute work with water distribution? IV The chute can be divided into three types according to the particle size of processed ore materials: (1) Coarse chute, the maximum Granularity of ore feeding is more than 2-3 mm, and the maximum can reach 100-200 mm. (2) Sand ore chute, processing 2-3mm Granularity ores. (3) Slurry spiral chute, feeding particle size ＜ 0.074 mm. 5、 This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphoethylene, tungsten, tin ore, tantalum ore, tantalum niobium ore or other nonferrous metals, rare metals and nonferrous metal ore bodies with different density and specific gravity from fine and small materials with Granularity of 0.3-0.02mm. Is water supplied during the operation of the spiral chute? Is water supplied during the operation of the spiral chute