Coal washing equipment spiral chute price

Coal washing equipment spiral chute price 1. Introduction: Gravity separation is widely used in metal and non-metallic ore beneficiation due to its low environmental pollution and low cost. Glass fiber reinforced plastic chute is one of the gravity beneficiation equipment, with a structural feature of a cubic parabolic cross-section. It is suitable for processing finer particle sizes of -0.2mm. In the sorting step, there is no need to add water to wash, and the bottom of the chute is divided into sections to obtain refined, medium, and tailings. 2、 Production principle: The screening device of the spiral concentrator is not limited to being placed on the cross (or tripod) of the support table. The average ore slurry is slowly fed to the surface of the rotating groove through the feeding groove installed at the end of the spiral groove head for sorting. The tail end is equipped with a valve block type equipment cutting groove, allowing the sorted products to be divided into three (or four) categories radially according to grade. Change the selection width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that gathers and exports the obtained variable mineral flows. The transverse plane of the spiral chute and the slope of the curve vary greatly, making it suitable for the separation of small particle mineral materials. Price 3, Advantages or Features of the Spiral Chute of the Coal Washing Equipment: 1. High efficiency, high recovery rate, and accurate mineral sorting; 2. Do not use power; 3. Small weight, anti rust, durable and anti wear, durable and anti corrosion; Low cost and long service life; 5 pairs of strong applicability for fluctuations in feed volume, density, particle size, and grade; The frictional force formed on the surface of 6 diamond sand makes the beneficiation effect better than other plastic surfaces. The price of spiral chute for coal washing equipment is . 4. The chute can be divided into three categories according to the Granularity of the processed ore materials: (1) Coarse grained chute. The maximum Granularity of the feed is more than 2-3 mm, and the maximum can be 100-200 mm. (2) The ore chute is used to handle 2-3 millimeter sized ore materials. (3) Slurry chute, with a feeding particle size less than 0.074MM. 5、 Application field: Spiral chutes are used for processing 0.6-0.03mm or vein ores and minerals, but high mud content is unfavorable for sorting. It has now been widely used for processing iron, tungsten, sand tin, tantalum niobium mines, beach or river sand mines, and sand gold, among others. Coal washing equipment spiral chute price Coal washing equipment spiral chute price