What kind of mineral is suitable for selecting the 2000 spiral chute

What kind of ore is suitable for selecting the 2000 spiral chute? 1. Explain that the chute selection belongs to the inclined surface flow selection process. Mortar is given to a partially inclined inclined chute or inclined surface. Under the push of water, the mineral particle group is loose and layered, and the upper layer of light minerals quickly flows out of the groove. The lower layer of heavy minerals are retained inside the groove or discharged slowly from the lower part. After receiving each, selected ore and tailings can be obtained. Fiberglass spiral chutes are equipment for mining and beneficiation, making them ideal for sand mining and beneficiation on beaches, river beds, beaches, and streams. The equipment has the characteristics of suitable structure, simple installation, small land occupation, simple operation, stable beneficiation, clear separation, strong processing capacity, high efficiency, high concentration, high recovery rate, and reliable operation. It has advantages such as light weight, moisture prevention, rust prevention, corrosion resistance, and strong adaptability to fluctuations in ore feed volume, concentration, particle size, and grade. 2、 Use skills to erect the glass fiber reinforced plastic spiral chute, calibrate the vertical line, use an iron frame or wood to position it at a suitable position, use the sand pump to send the mineral sand to the two feeding ports on the screw head, participate in making up the water, and mobilize the density of mineral mortar. The mineral slurry naturally rotates from high to low, and there is a coherent centrifugal force in the flow speed of the whirling inclined plane. The difference in the specific gravity, Granularity, and shape of the mineral sand can be obtained, By utilizing the gravity of the swirling flow and the centrifugal force, the sand and ore are separated, and the selected ore enters the concentrate hopper and is piped out. The tailings are discharged into the tailings hopper and moved to the sand tank through a pipeline, and then discharged by a sand pump, completing the entire beneficiation process. What kind of mineral is suitable for the selection of the 2000 spiral chute? 3. Features: 1. Stable sorting steps and easy operation. 2. Allowing for a wide range of feed densities. 3. Very high enrichment ratio and high recovery probability. 4. Small land occupation and low water consumption. 5. Simple structure, no power required. 6. Large processing capacity. 7. Easy installation and operation. 8. Low investment and quick results. What kind of mineral is suitable for the 2000 spiral chute The fiberglass spiral chute is composed of six parts: a feeding distributor, a feeding chute, a rotating groove, a product acquisition groove, an equipment gathering hopper, and a bracket (including a cross or triangular frame) for this groove. The spiral groove formed by connecting the spiral pieces is a key accessory. The rotating plate is made of fiberglass (fiberglass reinforced coal gangue) and connected together by screws. The rotating groove has a durable wear-resistant layer made in advance on the selected surface. He also has the advantages of lightweight, strong, durable and durable consumables that are not easily damaged. The spiral groove is equipped with a multi tube ore feeding homogenizer to separate minerals, which is easy to operate. The mineral separator does not need to be restricted to placing on a cross (or tripod) on a support table. The evenly divided slurry is slowly fed onto the surface of the spiral groove through the feeding chute at the head of the rotating groove for sorting. The tail of the rotating groove is installed in the valve type new equipment selection groove, and other new equipment is selected to be divided into three (or four) types of new products according to grade along the radial direction. Change the cutting width of each new product by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that distinguishes and converges the obtained multi-directional mineral flows. The cross-section of the spiral chute and the slope change of the curve are very suitable for the separation of fine particle materials. 5、 The application range of fiberglass spiral chute is suitable for processing 0.6-0.03MM and this vein ore and mineral, but it is unfavorable for separation when the mud content is high. Nowadays, it is widely used for processing iron ore, tungsten, tin ore sand, niobium tantalum ore, coastal and riverside placer mines, and sand gold mines. What kind of mineral is suitable for the 2000 type spiral chute