Production of mining fiberglass spiral chute

The production of fiberglass spiral chutes for mining purposes. 1. Description: Spiral concentrators summarize the characteristics of gravity spiral chutes, gravity spiral chutes, shakers, and gold concentrators. After evaluation by relevant scientific research, design, universities, and concentrators organized by the Ministry of Metallurgical Industry, it is believed that this type of mechanical performance is excellent, the separation goal is advanced, and it has been awarded the Science and Technology Research Achievement Award by the Ministry of Metallurgical Industry. It has now been recognized in the field of non-ferrous metals Black mining metals are widely used. This equipment is suitable for separating iron ore, Ilmenite, Chromite, pyrite, zircon, Rutile, monazite, phosphorus, tungsten sand, tin, tantalum niobium, niobium with Granularity of 0.3-0.02 mm from other non-ferrous metal ores, rare mineral metals and non-metallic minerals with specific gravity difference. 2、 The mortar with uniform working principle is slowly fed onto the rotating groove surface through the feeding chute installed on the rotating groove head, and the selection is carried out. The bottom of the spiral groove is equipped with a valve type equipment selection groove, allowing the sorted products to be divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the width of each device, the product gathering hopper aggregates and exports the intercepted variable mineral flow. The cross section of the spiral concentrator and the slope of the curve change greatly, making it suitable for the separation of fine ore particles. 3. Characteristics 1. Stable selection steps and easy operation 2. Allowing different ranges of feed density 3. Very high enrichment ratio and recovery rate 4. Small footprint and water consumption 5. Simple structure without power 6. Large processing capacity 7. Easy installation and operation 8. Rapid and effective production of glass fiber reinforced plastic spiral chutes for mining 4 The chute can be divided into three types according to the Granularity of the processed mineral aggregate: (1) coarse spiral chute, the maximum particle size of the feed is more than 2-3mm, and the maximum can reach 100-200mm. (2) Sand ore chute, processing 2-3mm Granularity mineral aggregate. (3) Slime spiral chute, feeding Granularity<0.074MM. 5、 Application field: Spiral chutes are used for processing 0.6-0.03mm or vein ores and minerals, but high mud content is unfavorable for sorting. It has now been widely used for processing iron, tungsten, sand tin, tantalum niobium mines, beach or river sand mines, and sand gold, among others. Production of Mineral Fiberglass Spiral Chutes Production of Mineral Fiberglass Spiral Chutes