Fiberglass spiral chute structure

Structure of fiberglass spiral chute 1. Overview: Gravity beneficiation spiral chute combines the characteristics of spiral concentrator, spiral concentrator, shaker, and centrifuge used for beneficiation. It has been identified and passed by relevant scientific research, design, universities, or concentrators organized by the Ministry of Metallurgical Industry. It is recognized that this type of equipment has superior performance, progress in sorting indicators, and has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It is now in the field of non-ferrous metals Ferrous is widely used. This machine is suitable for separating fine materials with a particle size of 0.3-0.02 mm to obtain iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon sand, Rutile ore, monazite ore, phosphate rock, tungsten ore, cassiterite, tantalum, niobium ore and other non-ferrous metal ores, rare metals and non-metallic ore bodies with different density and specific gravity. 2、 Technical principle: The fiberglass spiral chute mineral separator is not limited to stacking on the cross (or tripod) of the support table. The average mineral mortar is slowly fed onto the spiral groove surface through a feeding groove installed at the end of the rotating groove head for sorting. The tail is equipped with a valve type product selection slot, which divides the selection equipment into three types (or four types) according to grade along the radial direction. Change the cutting width of each product by adjusting the orientation of the valve block. The equipment gathering bucket is a concentric circular tube that allows the obtained multi head ore flow to gather and lead out. The cross section of the spiral chute is particularly suitable for the selection of fine ore particles due to changes in the slope of the curve. Glass fiber reinforced plastic spiral chute structure 3. Features 1. Stable sorting process and easy control 2. Large allowable variation range of ore feeding density 3. Ultra high enrichment ratio, high recovery probability, 4. Small occupied area and low water consumption 5. Simple structure without power 6. Strong processing capacity 7. Simple installation and easy operation 8. Small investment and quick effect glass fiber reinforced plastic spiral chute structure 4. Classification according to the particle size of the processed ore, The chutes can be divided into three types: (1) coarse chute, the maximum Granularity of ore feeding is more than 2-3 mm, and the maximum is 100-200 mm. (2) The ore chute handles 2-3 millimeter sized ores. (3) Slurry spiral chute, feeding particle size ＜ 0.074mm. 5、 Applicable field: The fiberglass chute is suitable for processing 0.6-0.03mm and vein ore as well as sand ore, but it is unfavorable for sorting when the mud content is high. Nowadays, it has been widely used in the processing of iron ore, tungsten, tin, tantalum niobium ore, coastal and riverside ore sands, gold mines, and so on. Fiberglass spiral chute structure Fiberglass spiral chute structure