Gravity gray iron selection spiral chute manufacturer direct sales

Gravity gray iron sorting spiral chute manufacturer direct sales 1. Introduction: Gravity gray iron sorting spiral chute is a combination of spiral chutes, spiral chutes, shaking tables, and centrifuges for mineral processing. After scientific research organized by the Ministry of Metallurgical Industry, evaluation conducted by design, universities, and mining departments, it is recognized that this type of mechanical performance is excellent, and the sorting goal is advanced. At the same time, it has won the Science and Technology Research Achievement Award from the Ministry of Metallurgical Industry. It has now been recognized in the field of non-ferrous metals Ferrous mines are widely used. This machine is suitable for separating iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon, Rutile, monazite, phosphate ore, wolframite, placer tin, tantalum niobium ore, tantalum niobium ore or other non-ferrous metal ores, rare mineral metals or non-metallic minerals with gravity difference from 0.3-0.02 mm fine materials. 2、 The average working principle of the slurry passes through the head of the spiral groove and is slowly fed to the rotating groove surface for sorting. The tail of the spiral groove is equipped with a valve type equipment to obtain the groove, and the sorted products are divided into three types according to grade along the radial direction. By adjusting the orientation of the valve block to change the cutting width of each equipment, the product gathering hopper allows the selected multi-directional mineral flow to converge and lead out. The slope change of the horizontal plane and curve of the spiral concentrator is very suitable for the selection of fine particle materials. Gravity iron separation spiral chute is sold directly by manufacturers III. Features This equipment is used to separate iron ore, ferrotitanium ore, chromite ore, pyrite ore, zircon, Rutile, monazite, phosgenite, tungsten, tin placer, tantalite, niobium ore with a particle size of 0.3-0.02mm, and other non-ferrous metal ores, rare mineral metals and non-metallic minerals can be obtained with gravity differences. This machine also has advantages such as stable sorting process, easy operation, wide range of feeding density, high enrichment ratio, high recovery rate, small area occupation, small water consumption, simple structure, no need for power, large processing capacity, easy installation, simple operation, low investment, and quick effectiveness. The gravity gray iron sorting spiral chute manufacturer directly sells . The structure of the spiral chute is composed of six parts: a feeding homogenizer, a feeding chute, a rotating chute, a product acquisition chute, an equipment gathering hopper, and a support bracket (including a cross or triangular frame). The spiral groove connected by the rotating disc is a key component. The spiral plate is made of fiberglass (fiber reinforced coal gangue), and a wear-resistant layer is pre made on the sorting surface of the rotating groove through bolts. She has the advantages of lightweight, strong, and durable consumer goods. Above the spiral groove, a multi tube feeding homogenizer is installed to evenly distribute the ore, and the operation is not complicated. The screening machine is not limited to being placed on the cross (or tripod) of the support table. The evenly distributed slurry is slowly fed onto the spiral groove surface through the feeding chute installed at the head of the rotating groove, and sorting is carried out. The tail end of the rotating groove is equipped with a valve block type new equipment to intercept the groove, allowing the sorted new products to be divided into three categories (or four categories) according to grade along the radial direction. Change the selection width of each new equipment by adjusting the position of the valve block. The new product gathering bucket is a concentric circular tube that gathers and exports various obtained mineral flows. The lateral plane of the spiral concentrator and the slope change of the curve are extremely suitable for the selection of fine-grained materials. 5、 The application scope of spiral concentrator is to separate fine grained iron ore, Ilmenite, Chromite, pyrite, sand tin ore, tantalum niobium ore, sand gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and nonferrous metal minerals with sufficient density and specific gravity difference. Gravity gray iron selection spiral chute manufacturer direct sales Gravity gray iron selection spiral chute manufacturer direct sales