Installation diagram of rotating spiral chute

The installation diagram of the rotating spiral chute is as follows: 1. Overview: Gravity separation is widely used in the beneficiation of metal and non-ferrous metals due to its low pollution and low cost. Spiral chute is one of the gravity beneficiation machines, characterized by a cubic parabolic cross-section, suitable for processing finer particle sizes of -0.2 millimeters. During the sorting process, there is no need to add water for flushing, and the end of the chute is divided into sections to select fine, medium, and tailings. 2、 Production principle: The spiral chute mineral separator does not need to be restricted from being stacked on the cross (or tripod) of the support table. The evenly proportioned mortar is slowly fed onto the surface of the spiral groove through the feeding groove installed at the end of the rotating groove head for selection. The tail is equipped with a valve type equipment selection tank, which divides the sorted products into three types (or four categories) according to grade along the radial direction. Change the cutting width of each device by adjusting the position of the valve block. The product gathering bucket is a concentric circular tube that allows for the dense export of the obtained variable mineral flow differentiation. The transverse plane of the fiberglass spiral chute has different slopes, which is very suitable for the separation of fine mineral particles. Installation diagram of the rotating spiral chute 3. Highlights and characteristics: 1. Stable, easy to control, with a relatively large concentration range. 2. The material production and processing capacity is large, with a high enrichment ratio and a high probability of recovery. 3. The area is not occupied much, consumes less water, has a simple structure, and does not require power. 4. Easy installation, simple operation, low investment, and quick returns. The installation diagram of the rotating spiral chute is IV. The structure of the fiberglass chute consists of six parts: a feeding homogenizer, a feeding groove, a rotating groove, a product cutting groove, an equipment gathering hopper, and a groove bracket (including a cross or triangular frame). The spiral groove formed by connecting the spiral pieces is the main component. The rotating plate is made of fiberglass (fiber reinforced coal gangue) and is bolted together. The rotating groove has a durable wear-resistant layer made in advance on each side. It has the advantages of light weight, firmness, and durability, which are not easy to damage consumer goods. The head of the spiral groove is equipped with a multi tube feeding homogenizer for ore dressing and averaging, which is easy to control. The sorting machine does not need to be placed on the cross (or tripod) of the support table. The evenly divided mineral mortar is slowly fed to the spiral groove surface through the feeding groove on the rotating groove head for sorting. The tail end of the rotating groove is equipped with a valve block type new equipment selection groove, which will classify the selected new products into three (or four) new products according to grade along the radial direction. To adjust the orientation of the valve block and change the width of each new equipment, it is necessary to cut it off. The new product gathering bucket is a concentric circular tube that allows the obtained multi-directional mineral flow to be densely drawn out. The horizontal plane of the spiral concentrator and the slope change of the curve are extremely suitable for the separation of fine particle ore. 5、 The application scope of spiral concentrator is to separate fine grained iron ore, Ilmenite, Chromite, pyrite, sand tin ore, tantalum niobium ore, sand gold, coal, monazite ore, Rutile ore, zircon sand, rare earth ore and other metal and nonferrous metal minerals with sufficient density and specific gravity difference. Installation diagram of rotating spiral chute Installation diagram of rotating spiral chute