Spiral chute quartz sand iron removal

Spiral chute quartz sand iron removal 1. Gravity beneficiation is widely used in the beneficiation of metallic and non-metallic ores due to its low pollution and cost. The spiral concentrator is one of the gravity separation machines, with a structural feature that the cross-section presents a cubic parabolic shape, suitable for processing finer particle sizes of -0.2mm. In the sorting process, there is no need to add flushing water, and the fine, medium, and tailings are segmented at the tail end of the tank. 2、 The principle of operation is that the slurry is slowly fed to the rotating groove surface through the feeding chute at the end of the spiral groove head, and sorting is carried out. The tail of the spiral groove is equipped with a valve type product acquisition groove, allowing other equipment to be classified into three categories according to grade along the radial direction. By adjusting the orientation of the valve block to change the selection width of each product, the equipment gathering bucket will densely extract the intercepted multi-directional mineral flow. The cross section of the spiral concentrator and the slope change of the curve are extremely suitable for the selection of fine materials. spiral chute quartz sand iron removal III, the characteristic spiral concentrator is particularly concerned among many heavy concentration equipment because of its low power consumption, simple structure, small floor area, simple operation, stable beneficiation, clear mineral separation, no moving parts, convenient Computerized maintenance management system, large single area processing output, etc. The machinery has a wide and relatively flat groove surface, and the mineral mortar flows in a large area in a laminar flow, making it more suitable for handling medium to fine (-4mm) particle sized ores. We have produced fiberglass chutes with diameters of 400, 600, 900, and 1200MM in China, Ф The processing output of 1200mm four heads is about 4-6 tons per hour. Spiral chute quartz sand iron removal 4. Structural composition: The fiberglass chute is composed of a feeding homogenizer, a cross (tripod), a feeding groove, a rotating groove, a selection groove, a gathering bucket, and a groove support. 5、 Scope of application: FRP spiral chute is applicable to the separation of fine grained iron, ferrotitanium, ferrochrome, pyrite, tin ore, tantalum niobium ore, placer gold, coal, monazite, Rutile, zircon ore, rare earth ore and other metals and non-ferrous metal minerals with full density ratio difference. Spiral chute quartz sand iron removal Spiral chute quartz sand iron removal